{"title":"Hydrocarbon","description":"\u003cp\u003eEverything we build and stock for closed loop hydrocarbon extraction: ASME solvent tanks and recovery vessels, complete passive systems, condensers, sight glass, cryogenic relief valves, molecular sieve, fittings, hose and the wear parts that go with them.\u003c\/p\u003e\n\u003cp\u003eButane, propane and blends. If you run ethanol instead, the \u003ca href=\"\/collections\/ethanol-products\"\u003eEthanol\u003c\/a\u003e collection is the one you want.\u003c\/p\u003e","products":[{"product_id":"full-extraction-system-10lb-fully-passive-system","title":"10 LB Closed Loop Extractor, Passive Hydrocarbon System","description":"\u003cp\u003e10 LB passive closed loop hydrocarbon extractor. One 6 in x 48 in jacketed material column, 4,500 g of dry material per run, ASME pressure vessels rated 250 psi (17.2 bar), fully passive recovery with no solvent pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice is $115,000, or $127,100 with the Aqua-Tech CRC column. This machine is not sold through the cart. Contact us to purchase.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCONTACT US TO PURCHASE\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCall the shop at 541-330-6409, or use the \u003ca href=\"\/pages\/contact\"\u003econtact page\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTell us your throughput, your room and your permit situation. We will tell you honestly whether a 10 LB is the right machine for you or whether you should be buying the 20 LB.\u003c\/li\u003e\n\u003cli\u003eBuilt to order. Lead time is quoted on the phone, not published, because we build this one by arrangement.\u003c\/li\u003e\n\u003cli\u003ePaid in full before anything ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight. Freight is quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWithout CRC column\u003c\/td\u003e\n\u003ctd\u003e$115,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWith Aqua-Tech CRC column\u003c\/td\u003e\n\u003ctd\u003e$127,100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAqua-Tech CRC column, as an option\u003c\/td\u003e\n\u003ctd\u003e$12,100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB system\u003c\/a\u003e is what comes out of the shop as standard production, and it is what the published 20 week lead time applies to. If you want something smaller than a 20 LB, this is the page to call about.\u003c\/p\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice, without CRC column\u003c\/td\u003e\n\u003ctd\u003e$115,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice, with Aqua-Tech CRC column\u003c\/td\u003e\n\u003ctd\u003e$127,100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHow to buy\u003c\/td\u003e\n\u003ctd\u003eContact us to purchase, 541-330-6409. Not sold through the cart\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity per run\u003c\/td\u003e\n\u003ctd\u003e4,500 g, about 9.9 lb, of dry material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial column\u003c\/td\u003e\n\u003ctd\u003eOne, 6 in x 48 in, with a 7 in liquid CO2 jacket, bowl reducer and cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003e50 and 20 micron stainless sintered filter stack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery vessel\u003c\/td\u003e\n\u003ctd\u003e12 in x 52 in, jacketed, ASME certified, with jacketed bowl reducer and hot water jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tank\u003c\/td\u003e\n\u003ctd\u003e100 lb, ASME certified, liquid CO2 chilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve\u003c\/td\u003e\n\u003ctd\u003e6 in x 24 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP, vessels\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery\u003c\/td\u003e\n\u003ctd\u003eFully passive, no solvent pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlso included\u003c\/td\u003e\n\u003ctd\u003eN2 regulator with 8 ft hose and quick connect, Superlok and Swagelok fittings and hoses throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eASME Section VIII Division 1, U stamp, plus third party P.E. report\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate and shipping weight\u003c\/td\u003e\n\u003ctd\u003e70.5 in long x 63 in wide x 94.75 in tall, 1,850 lb, LTL freight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eNB-HC-SYS-10LB, or NB-HC-SYS-10LB-CRC with the column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eChilling and heating equipment is not included. Liquid CO2 installation is done by your local gas supplier.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. The pressure vessels are welded in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eAll stainless is fabricated here. Gaskets, filter cartridges and filter socks are purchased parts and are not represented as ours.\u003c\/li\u003e\n\u003cli\u003eFull P.E. report on file. The 10 LB is certified under 3P Certz reports ECR-180021, ECR-190003 and ECR-190004.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWHY WE PUSH THE 20 LB INSTEAD\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e10 LB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e20 LB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry material per run\u003c\/td\u003e\n\u003ctd\u003e4,500 g\u003c\/td\u003e\n\u003ctd\u003e9,000 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLive resin per run\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003e16,329 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial columns\u003c\/td\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003ctd\u003eTwo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$115,000\u003c\/td\u003e\n\u003ctd\u003e$160,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003eBy arrangement, quoted on the phone\u003c\/td\u003e\n\u003ctd\u003e20 weeks, published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoom to grow\u003c\/td\u003e\n\u003ctd\u003eNone built in\u003c\/td\u003e\n\u003ctd\u003eRack takes a second pair of columns or a CRC later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHow to buy\u003c\/td\u003e\n\u003ctd\u003eContact us to purchase\u003c\/td\u003e\n\u003ctd\u003eWritten quote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDouble the material per run for about 40 percent more money, on a rack you can add to, with a lead time we will commit to in writing. That is the whole argument, and it is why we send most buyers to the 20 LB. If the 10 LB footprint or budget is the one that fits your room, call and say so.\u003c\/p\u003e\n\n\u003ch3\u003eCONSUMABLES\u003c\/h3\u003e\n\u003cp\u003eIf you already own a 10 LB, we stock every wear part for it: \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton gaskets\u003c\/a\u003e, \u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003ecryogenic PRVs\u003c\/a\u003e, \u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamps\u003c\/a\u003e with \u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eM12 bolt kits\u003c\/a\u003e, \u003ca href=\"\/products\/molecular-sieve-beads-4a-pore-size\"\u003e4A molecular sieve beads\u003c\/a\u003e, \u003ca href=\"\/products\/6-inch-filter-sock\"\u003e6 in filter socks\u003c\/a\u003e and \u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003esintered tri clamp filters\u003c\/a\u003e. Quantities on a 10 LB are smaller than the published 20 LB figures, so take them from the parts table in your Operators Manual rather than scaling.\u003c\/p\u003e\n","brand":"N.B.Oler","offers":[{"title":"Without CRC Column","offer_id":31384415010873,"sku":"NB-HC-SYS-10LB","price":115000.0,"currency_code":"USD","in_stock":false},{"title":"With Aqua-Tech CRC Column","offer_id":31384414978105,"sku":"NB-HC-SYS-10LB-CRC","price":127100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/10LBHydrocarbon7_Beauty.png?v=1657561663"},{"product_id":"rayotek-2-inch-sanitarytri-clamp-sight-glass-borosilicate-2205-duplex-stainless-steel","title":"Rayotek 2\" Tri-Clamp Sight Glass, Borosilicate \u0026 2205 Duplex","description":"\u003cp\u003eA 2 inch tri clamp sight window, borosilicate fused directly to a 2205 duplex stainless ring. Rayotek part number 101142-001. $449.95 each, and most builds take two.\u003c\/p\u003e\n\n\u003ch2\u003eCertified ratings\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eRayotek 101142-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e2 in tri clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003ctd\u003eBorosilicate, fused to the ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWetted materials\u003c\/td\u003e\n\u003ctd\u003eDuplex stainless and borosilicate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e300 psi (20.7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pressure\u003c\/td\u003e\n\u003ctd\u003e-15 psi (-1.0 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e-40 °F to 572 °F (-40 °C to 300 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource\u003c\/td\u003e\n\u003ctd\u003e3P Certz report ECR-250902-R0, Appendix A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$449.95 each, two per sight spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eBuilt to order. Contact the shop for lead time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThose are the figures recorded against this exact part number in our own certification report, not a catalog claim. Three things follow from them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 psi (20.7 bar) is the glass. 250 psi (17.2 bar) is the system.\u003c\/strong\u003e An N.B. Oler hydrocarbon system is designed to 250 psi (17.2 bar), and that is what the relief valve is set to. The lowest applicable limit always governs, so do not read 300 psi (20.7 bar) as permission to run a system to 300 psi.\u003c\/li\u003e\n\u003cli\u003e-15 psi (-1.0 bar) is your vacuum limit for the whole assembly. ECR-250902-R0 names the 2 inch sight glass as the limiting component on minimum pressure. Everything else in the system goes deeper.\u003c\/li\u003e\n\u003cli\u003eThe glass is fused to the metal ring rather than clamped against a seal, so there is no gasket inside the window to creep, take a set or be attacked by solvent. You still need a gasket at the tri clamp joint itself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRayotek or MetaClamp\u003c\/h2\u003e\n\u003cp\u003eWe stock both and fit them interchangeably, whichever is on the shelf. This one is built to order at the moment. Our 2 inch MetaClamp window is in stock at the same price if you need one today.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eRayotek, this page\u003c\/td\u003e\n\u003ctd\u003eMetaClamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure\u003c\/td\u003e\n\u003ctd\u003e300 psi (20.7 bar)\u003c\/td\u003e\n\u003ctd\u003e230 psig (15.9 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e-40 °F to 572 °F (-40 °C to 300 °C)\u003c\/td\u003e\n\u003ctd\u003e536 °F (280 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pressure\u003c\/td\u003e\n\u003ctd\u003e-15 psi (-1.0 bar)\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNamed by part number in ECR-250902-R0\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$449.95\u003c\/td\u003e\n\u003ctd\u003e$449.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIf you are matching existing windows on a system, match what you already have. If you are certifying or recertifying, confirm your choice with your own certifier.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you also need\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo windows per sight spool, one in each 2 inch port\u003c\/li\u003e\n\u003cli\u003eOne 2 inch gasket per window, Viton or PTFE envelope\u003c\/li\u003e\n\u003cli\u003eOne 2 inch high pressure clamp per window\u003c\/li\u003e\n\u003cli\u003eThe spool itself, 4 inch or 6 inch, if you do not already have one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits our 4 inch and 6 inch sight glass spools, and any standard 2 inch tri clamp port. Nothing in the list above is included.\u003c\/p\u003e\n\n\u003ch2\u003eHandling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect before every install. A chipped, cracked or scratched window comes out of service and does not go back in\u003c\/li\u003e\n\u003cli\u003eNever modify, machine or re-face a sight window\u003c\/li\u003e\n\u003cli\u003eClean with a soft cloth and a solvent compatible with borosilicate and 2205. No abrasives, nothing metal on the glass face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt to order, shipped from Bend, Oregon.\u003c\/p\u003e","brand":"N.B. Oler","offers":[{"title":"Default Title","offer_id":917377351699,"sku":"RTK-101142-001","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/sightglassbottom_061605a4-2d5c-4363-95fa-d2882111c22b.png?v=1528490677"},{"product_id":"sintered-tri-clamp-filter","title":"Sintered Tri-Clamp Filter Plate (Sintered Disc Filter)","description":"\u003cp\u003eA 316L sintered stainless filter disc welded into a tri clamp ring, built in house in Bend, Oregon. Four inch $650.00, six inch $850.00, ten inch $1,250.00, each in 1, 2, 5, 10, 20 and 50 micron. You are buying the disc. Clamps, gaskets and spools are sold separately.\u003c\/p\u003e\n\u003ch3\u003eOrientation: dull side toward the flow, every time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe dull face carries the fine pores, the shiny face the coarse ones, and the pore structure between them is funnel shaped.\u003c\/li\u003e\n\u003cli\u003eFlow into the dull side and material stops on the fine surface, where it cleans off.\u003c\/li\u003e\n\u003cli\u003eFlow into the shiny side and it rides the taper deep into the media, where it cannot be removed.\u003c\/li\u003e\n\u003cli\u003eIn a top-down column: dull up, shiny down. There is no application where the shiny side goes first.\u003c\/li\u003e\n\u003cli\u003eWhen you stack discs, orient every disc in the stack individually, not just the top one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizes, price and limits\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003cth\u003eMax working pressure\u003c\/th\u003e\n\u003cth\u003eMax differential\u003c\/th\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 in\u003c\/td\u003e\n\u003ctd\u003e$650.00\u003c\/td\u003e\n\u003ctd\u003e600 psi (41.4 bar)\u003c\/td\u003e\n\u003ctd\u003e80 psi (5.5 bar)\u003c\/td\u003e\n\u003ctd\u003e4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 in\u003c\/td\u003e\n\u003ctd\u003e$850.00\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003e60 psi (4.1 bar)\u003c\/td\u003e\n\u003ctd\u003e8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 in\u003c\/td\u003e\n\u003ctd\u003e$1,250.00\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar)\u003c\/td\u003e\n\u003ctd\u003e10 psi (0.7 bar)\u003c\/td\u003e\n\u003ctd\u003e15 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eTemperature: N.B. Oler rates the disc from -80 C to 200 C, which is -112 F to 392 F.\u003c\/li\u003e\n\u003cli\u003eThe disc rating is not the joint rating. An N.B. Oler vessel is designed to 93 C (200 F) per 3P Certz DCR-200101-R1, and the system operates to 50 C (122 F). The lowest applicable limit always governs, so never take a joint to the disc rating.\u003c\/li\u003e\n\u003cli\u003eFilter media 316L sintered stainless. Tri clamp ring 304L stainless.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich micron goes where\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eMicron\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial columns\u003c\/td\u003e\n\u003ctd\u003e50 and 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor remediation column\u003c\/td\u003e\n\u003ctd\u003eA mixture of 10, 5, 2 and 1, stacked in decreasing rating in the direction of flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve housing\u003c\/td\u003e\n\u003ctd\u003e10 on both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThese are cleaned, not replaced\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eIf the filter will not flow solvent at 15 psig (1.0 bar) it is clogged. Stop the run.\u003c\/li\u003e\n\u003cli\u003eEqualize pressure gently, less than 0.1 psi (0.007 bar) per second, and remove the disc.\u003c\/li\u003e\n\u003cli\u003eBrush the cake off with a nylon or brass brush, never anything harder than stainless.\u003c\/li\u003e\n\u003cli\u003eUltrasonicate in Alconox or a similar 304 and 316 compatible lab detergent.\u003c\/li\u003e\n\u003cli\u003eBlow out with clean compressed air or nitrogen against the direction you flowed media, so debris exits back out the same dull face that caught it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eBlowing out a removed disc is part of the procedure. Back-flowing is not. Running solvent backwards through an installed filter takes the path of least resistance and leaves the media dirty, so never back-flow solvent in place of the cleaning procedure.\u003c\/p\u003e\n\u003cp\u003eTo check it is clean, pour one US gallon of cold tap water onto the disc, dull side up, and time it until no visible puddle remains. A clean 4 inch 50 micron runs 31 seconds, a clean 4 inch 1 micron runs 4 minutes 25 seconds. The full table for both diameters and all six ratings is in the specifications below and in \u003ca href=\"\/blogs\/tech\/sintered-filter-technical-specifications\"\u003eSintered Filter Technical Specifications\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eStock, spares and service\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep a second full set on the shelf so one set runs while the other is in the ultrasonic bath.\u003c\/li\u003e\n\u003cli\u003eNo ultrasonic cleaner? Mail your discs to the shop and we will clean them for you. Contact us for the service.\u003c\/li\u003e\n\u003cli\u003eTen inch discs are built to order. Contact the shop for current lead time.\u003c\/li\u003e\n\u003cli\u003eN.B. Oler built the first sintered tri clamp filter plate for hydrocarbon extraction in 2016, and has built them in house in Bend, Oregon ever since.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"N.B.Oler","offers":[{"title":"4\" 1 micron","offer_id":959998066707,"sku":"SF-4-1","price":650.0,"currency_code":"USD","in_stock":true},{"title":"4\" 2 micron","offer_id":959998099475,"sku":"SF-4-2","price":650.0,"currency_code":"USD","in_stock":true},{"title":"6\" 1 micron","offer_id":959998132243,"sku":"SF-6-1","price":850.0,"currency_code":"USD","in_stock":true},{"title":"6\" 2 micron","offer_id":959998165011,"sku":"SF-6-2","price":850.0,"currency_code":"USD","in_stock":true},{"title":"10\" 1 micron","offer_id":959998263315,"sku":"SF-10-1","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"10\" 2 micron","offer_id":959998296083,"sku":"SF-10-2","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"6\" 5 micron","offer_id":19273322823737,"sku":"SF-6-5","price":850.0,"currency_code":"USD","in_stock":true},{"title":"4\" 5 micron","offer_id":19318081323065,"sku":"SF-4-5","price":650.0,"currency_code":"USD","in_stock":true},{"title":"4\" 10 micron","offer_id":19318082469945,"sku":"SF-4-10","price":650.0,"currency_code":"USD","in_stock":true},{"title":"4\" 20 micron","offer_id":19318083813433,"sku":"SF-4-20","price":650.0,"currency_code":"USD","in_stock":true},{"title":"4\" 50 micron","offer_id":19318085484601,"sku":"SF-4-50","price":650.0,"currency_code":"USD","in_stock":true},{"title":"6\" 10 micron","offer_id":30354160025657,"sku":"SF-6-10","price":850.0,"currency_code":"USD","in_stock":true},{"title":"6\" 20 micron","offer_id":30354164842553,"sku":"SF-6-20","price":850.0,"currency_code":"USD","in_stock":true},{"title":"6\" 50 micron","offer_id":30354169626681,"sku":"SF-6-50","price":850.0,"currency_code":"USD","in_stock":true},{"title":"10\" 5 micron","offer_id":30354176311353,"sku":"SF-10-5","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"10\" 10 micron","offer_id":30354182701113,"sku":"SF-10-10","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"10\" 20 micron","offer_id":30354186240057,"sku":"SF-10-20","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"10\" 50 micron","offer_id":30354190532665,"sku":"SF-10-50","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/6inFilter40_Beauty.png?v=1656539266"},{"product_id":"compound-gauge-2-5-in-300-psi","title":"Compound Gauge, 2.5\" Dial, -30 inHg to 300 PSI, 3\/8\" Tube Stub","description":"\u003cp\u003eA 2.5 inch compound gauge that reads vacuum and pressure on one dial, from -30 inHg through 0 to 300 PSI (20.7 bar), with a 3\/8 inch tube stub lower connection. $114.95.\u003c\/p\u003e\n\n\u003cp\u003eThis is the gauge fitted to N.B. Oler columns and vessels, so if you are replacing one, it is the same part, the same dial and the same connection.\u003c\/p\u003e\n\n\u003ch3\u003eCheck the connection before you order\u003c\/h3\u003e\n\n\u003cp\u003eThe connection is a bare 3\/8 inch tube stub and \u003cstrong\u003eno nut and ferrule set is included.\u003c\/strong\u003e The stub goes into your own 3\/8 inch compression fitting and you swage it on.\u003c\/p\u003e\n\n\u003cp\u003eIt is not a pipe thread and it will not screw into a 1\/4 inch NPT gauge port, which is what most extraction gauges use.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDial size\u003c\/td\u003e\n\u003ctd\u003e2.5 in (63 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange\u003c\/td\u003e\n\u003ctd\u003e-30 inHg \/ 0 \/ 300 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecond scale\u003c\/td\u003e\n\u003ctd\u003e-1 to 21 bar, printed on the same face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e3\/8 in tube stub, lower mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e+\/- 1.6 % of full scale, ASME B40.100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase\u003c\/td\u003e\n\u003ctd\u003e304 stainless, crimped ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBourdon tube and socket\u003c\/td\u003e\n\u003ctd\u003e316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMovement\u003c\/td\u003e\n\u003ctd\u003e316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens\u003c\/td\u003e\n\u003ctd\u003eAcrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase fill\u003c\/td\u003e\n\u003ctd\u003eGlycerin, rated to -40 C (-40 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating range\u003c\/td\u003e\n\u003ctd\u003e-40 C (-40 F) to 65 C (150 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWetted materials\u003c\/td\u003e\n\u003ctd\u003e316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQualified in\u003c\/td\u003e\n\u003ctd\u003e3P Certz engineering report ECR-250902-R0, Appendix A, item 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy glycerin filled\u003c\/h3\u003e\n\n\u003cp\u003eThe fill damps pointer flutter from pump pulsation and compressor cycling, which is what kills a dry gauge on an extraction system.\u003c\/p\u003e\n\n\u003cp\u003eIf you are running the vessel colder than -40 C (-40 F), drain the fill before you take it down. Glycerin stiffens below its rating and the pointer stops tracking.\u003c\/p\u003e\n\n\u003ch3\u003ePicking a range\u003c\/h3\u003e\n\n\u003cp\u003eThe gauge maker's rule is to pick a dial about twice the working pressure, with working pressure sitting in the middle half of the scale, 25 to 75 percent. On a 300 PSI (20.7 bar) dial that middle half is 75 to 225 PSI (5.2 to 15.5 bar).\u003c\/p\u003e\n\n\u003cp\u003eThe 250 PSI (17.2 bar) on an N.B. Oler system is the design pressure, not where the needle sits on a run. Normal operating pressure falls inside that 75 to 225 PSI band, and the dial still has scale left above the design pressure and full vacuum below it. A 60 PSI dial has neither, which is why the 300 PSI range is the one we stock for extraction service.\u003c\/p\u003e\n\n\u003ch3\u003eTwo scales on one face\u003c\/h3\u003e\n\n\u003cp\u003eThe face carries -30 inHg to 300 PSI and -1 to 21 bar, so one gauge reads for a crew working in either unit. It is printed with the N.B. Oler logo in black and gold, which makes it easy to tell from a generic replacement.\u003c\/p\u003e\n\n\u003cp\u003eBuilt to our specification, with our dial, our temperature rating and our range. Stocked in Bend, Oregon.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"-30in\/Hg to 300psi","offer_id":10700631048249,"sku":"NBO-GAUGE-300","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Untitled_design_24.png?v=1529526744"},{"product_id":"high-performance-ptfe-hose-with-compression-fitting-tube-adaptor","title":"Static Dissipative PTFE Hose, Stainless Braided, 3\/8\" to 3\/4\"","description":"\u003cp\u003eA static dissipative PTFE hose assembly with a stainless steel braid and 316 stainless compression tube stub ends crimped on both sides, in 3\/8, 1\/2 and 3\/4 inch, from 24 to 144 inches. $234.95 to $1,054.95. Crimped in Bend, Oregon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCertified static dissipative.\u003c\/strong\u003e The PTFE liner has carbon blended into it, so the charge that solvent builds moving through the bore is carried to the fitting instead of stored in the wall. 3P Certz engineering report ECR-250902-R0 instructs the operator directly: do not attach hoses without an approved static dissipative rating to the collection port, and the required warning label on a certified system reads \"Use static dissipative hoses.\"\u003c\/p\u003e\n\u003ch3\u003eRatings\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eFigure\u003c\/th\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure, assembly\u003c\/td\u003e\n\u003ctd\u003e1000 psi (68.9 bar)\u003c\/td\u003e\n\u003ctd\u003eECR-250902-R0, as N.B. Oler part NBO-PTFE-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure, hose component alone\u003c\/td\u003e\n\u003ctd\u003e900 psi (62.1 bar)\u003c\/td\u003e\n\u003ctd\u003eECR-250902-R0, Parker STB series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-80 to 200 °C (-112 to 392 °F)\u003c\/td\u003e\n\u003ctd\u003eECR-250902-R0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWetted materials\u003c\/td\u003e\n\u003ctd\u003e316 stainless and PTFE\u003c\/td\u003e\n\u003ctd\u003eECR-250902-R0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNFPA 58 minimum after couplings\u003c\/td\u003e\n\u003ctd\u003e700 psig (48.3 bar)\u003c\/td\u003e\n\u003ctd\u003eNFPA 58, 5.11.6.4(C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eNFPA 58 requires an LP-Gas hose assembly to hold at least 700 psig (48.3 bar) once the couplings are on. This one is certified at 1000 psi (68.9 bar).\u003c\/p\u003e\n\u003ch3\u003eSizes and bore\u003c\/h3\u003e\n\u003cp\u003eThe hose is named by its fitting size, not its bore. Size from these numbers if you are working out flow.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eHose size\u003c\/th\u003e\n\u003cth\u003eActual inside diameter\u003c\/th\u003e\n\u003cth\u003eLengths\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8 in.\u003c\/td\u003e\n\u003ctd\u003e0.245 in.\u003c\/td\u003e\n\u003ctd\u003e24, 36, 48, 60, 72, 96, 108, 120, 144 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 in.\u003c\/td\u003e\n\u003ctd\u003e0.37 in.\u003c\/td\u003e\n\u003ctd\u003e24, 36, 48, 60, 72, 96 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in.\u003c\/td\u003e\n\u003ctd\u003e0.62 in.\u003c\/td\u003e\n\u003ctd\u003e24, 48, 60, 72 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering and fitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength is end to end, tip to tip, across the whole assembly including both fittings. Order the length you need to span, not the hose between the ferrules\u003c\/li\u003e\n\u003cli\u003eThe fitting size has to match the hose size. We cannot crimp a 3\/4 inch fitting onto a 3\/8 inch hose. Going from one size to another is done with a reducer compression fitting outside the assembly, which adds length at each end\u003c\/li\u003e\n\u003cli\u003eAny length, built to order. We have built 18, 30, 54 and 84 inch assemblies among others, so ask\u003c\/li\u003e\n\u003cli\u003eNot a sanitary hose. An exposed wire braid traps product between the strands, cannot be wiped down properly, and the cut wire ends at the ferrule will catch a glove. This is a process hose for solvent service. If you need a cleanable exterior for wash-down or food contact, this is not the part\u003c\/li\u003e\n\u003cli\u003eOn bend radius, because it is the most common disappointment: black braided PTFE, white PTFE and stainless braided hose all bend about the same, because all three are built around the same PTFE core. Changing the cover does not meaningfully tighten the radius. For a hard turn in a confined space the answer is bent stainless tubing fabricated to your geometry, and we do that work too\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInspection, per the certifier\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBefore each run, check every hose for cracking, splitting or kinking. A failed hose is replaced before the process continues\u003c\/li\u003e\n\u003cli\u003eAt least once a year, remove and inspect every hose, including the runs you cannot see in place\u003c\/li\u003e\n\u003cli\u003eNever try to clear a blocked or kinked hose with pressure. Replace it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe built these with Swagelok assemblies for years and moved to this hose, crimped in our own shop, for lead time and control over the build. Related reading: \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003eCertifications and Compliance\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"24\" \/ 3\/8\"","offer_id":19273755066425,"sku":"06STB3232-24","price":234.95,"currency_code":"USD","in_stock":true},{"title":"24\" \/ 1\/2\"","offer_id":19273806676025,"sku":"08STB3232-24","price":329.95,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 3\/8\"","offer_id":19273806708793,"sku":"06STB3232-36","price":284.95,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 1\/2\"","offer_id":19273806741561,"sku":"08STB3232-36","price":394.95,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 3\/8\"","offer_id":19273806774329,"sku":"06STB3232-48","price":334.95,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 1\/2\"","offer_id":19273806807097,"sku":"08STB3232-48","price":404.95,"currency_code":"USD","in_stock":true},{"title":"60\" \/ 3\/8\"","offer_id":19273806839865,"sku":"06STB3232-60","price":389.95,"currency_code":"USD","in_stock":true},{"title":"60\" \/ 1\/2\"","offer_id":19273806872633,"sku":"08STB3232-60","price":464.95,"currency_code":"USD","in_stock":true},{"title":"72\" \/ 3\/8\"","offer_id":19273806905401,"sku":"06STB3232-72","price":404.95,"currency_code":"USD","in_stock":true},{"title":"72\" \/ 1\/2\"","offer_id":19273806938169,"sku":"08STB3232-72","price":524.95,"currency_code":"USD","in_stock":true},{"title":"96\" \/ 3\/8\"","offer_id":19273806970937,"sku":"06STB3232-96","price":519.95,"currency_code":"USD","in_stock":true},{"title":"96\" \/ 1\/2\"","offer_id":19273807003705,"sku":"08STB3232-96","price":639.95,"currency_code":"USD","in_stock":true},{"title":"24\" \/ 3\/4\"","offer_id":36208884744344,"sku":"12STB3232-24","price":579.95,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 3\/4\"","offer_id":36208913612952,"sku":"12STB3232-48","price":814.95,"currency_code":"USD","in_stock":true},{"title":"60\" \/ 3\/4\"","offer_id":36208941203608,"sku":"12STB3232-60","price":924.95,"currency_code":"USD","in_stock":true},{"title":"72\" \/ 3\/4\"","offer_id":36208947396760,"sku":"12STB3232-72","price":1054.95,"currency_code":"USD","in_stock":true},{"title":"144\" \/ 3\/8\"","offer_id":39941722964167,"sku":"06STB3232-144","price":724.95,"currency_code":"USD","in_stock":true},{"title":"120\" \/ 3\/8\"","offer_id":44701947461831,"sku":"06STB3232-120","price":624.95,"currency_code":"USD","in_stock":true},{"title":"108\" \/ 3\/8\"","offer_id":44701948739783,"sku":"06STB3232-108","price":569.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/DSC00542j.jpg?v=1632761034"},{"product_id":"high-pressure-double-bolted-tri-clamps","title":"High Pressure Double Bolted Tri Clamp, 1.5\" to 4\", to 1433 PSI","description":"\u003cp\u003eA double bolted high pressure tri clamp in 304 stainless, in 1.5 inch at $12.95, 2 inch at $22.95 and 4 inch at $36.95. Built to our specification with our own logo on the casting, and stocked in Bend, Oregon.\u003c\/p\u003e\n\u003cp\u003eThe 1.5 inch is certified at 1433 psi (99 bar) at 110 F (43 C). A single hinge wing nut clamp in the same size, in the same report, comes in at 444 psi (31 bar). Both figures are from one third party engineering report, 3P Certz ECR-250902-R0, which names our clamps by part number.\u003c\/p\u003e\n\n\u003ch2\u003ePressure ratings by size\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eCertified at 110 F (43 C)\u003c\/th\u003e\n\u003cth\u003ePublished at 70 F (21 C)\u003c\/th\u003e\n\u003cth\u003ePublished at 250 F (121 C)\u003c\/th\u003e\n\u003cth\u003eMax clamp torque\u003c\/th\u003e\n\u003cth\u003eReplacement bolt set\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5\"\u003c\/td\u003e\n\u003ctd\u003e1433 psi (99 bar)\u003c\/td\u003e\n\u003ctd\u003e1500 psi (103 bar)\u003c\/td\u003e\n\u003ctd\u003e1200 psi (83 bar)\u003c\/td\u003e\n\u003ctd\u003e130 in-lbf\u003c\/td\u003e\n\u003ctd\u003e2.25\"\u003c\/td\u003e\n\u003ctd\u003e$12.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003ctd\u003e956 psi (66 bar)\u003c\/td\u003e\n\u003ctd\u003e1000 psi (69 bar)\u003c\/td\u003e\n\u003ctd\u003e800 psi (55 bar)\u003c\/td\u003e\n\u003ctd\u003e130 in-lbf\u003c\/td\u003e\n\u003ctd\u003e2.75\"\u003c\/td\u003e\n\u003ctd\u003e$22.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003ctd\u003eNot covered\u003c\/td\u003e\n\u003ctd\u003e800 psi (55 bar)\u003c\/td\u003e\n\u003ctd\u003e600 psi (41 bar)\u003c\/td\u003e\n\u003ctd\u003e200 in-lbf\u003c\/td\u003e\n\u003ctd\u003e3.25\"\u003c\/td\u003e\n\u003ctd\u003e$36.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe certified column comes from ECR-250902-R0. The published columns are the catalog table for this clamp line, which is a different kind of evidence, so the two are kept apart. The 4 inch is not in that report and we do not extrapolate a figure for it.\u003c\/p\u003e\n\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless body. Appendix A of the report describes it as a high pressure tri-clamp with 3\/8-16 304SS bolts, stainless steel body with brass nuts, wetted material 304 SS.\u003c\/li\u003e\n\u003cli\u003eTwo 3\/8-16 bolts and two brass nuts per clamp. The two bolt design puts the load into threads instead of a hinge pin, which is what lets it hold pressure a hinged clamp cannot.\u003c\/li\u003e\n\u003cli\u003eThe brass nut is the sacrificial part. It gives before the stainless bolt thread does, which is what protects the bolt.\u003c\/li\u003e\n\u003cli\u003eStandard tri-clamp connection, so it fits the ferrules and gaskets you already have.\u003c\/li\u003e\n\u003cli\u003eWe do not claim 3-A or food grade certification on this clamp, and we are not going to imply one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTorque, and the PTFE question\u003c\/h2\u003e\n\u003cp\u003eYour gasket sets the torque, not the clamp. 30 in-lbs for elastomeric gaskets, meaning Buna-N, Viton and silicone. 50 in-lbs for rigid gaskets, meaning PTFE and Tuf-Steel. The casting will take 130 in-lbs in the 1.5 and 2 inch and 200 in-lbs in the 4 inch, and you should never get near that. Over-tightening crushes the gasket and puts the load on the threads, which is how these fail.\u003c\/p\u003e\n\u003cp\u003ePTFE gaskets are fine on these clamps, whatever you have read elsewhere. Our certification report lists PTFE and Tuf-Steel gaskets as approved components on the same systems as these clamps, and our operator's manual gives 50 in-lbs for rigid gaskets. Torque to that and it is a certified joint.\u003c\/p\u003e\n\u003cp\u003eReplace the nuts every 6 months and the bolts every year, regardless of how they look. Tri clamp hardware fails from thermal cycling long before it shows wear, which is why the interval beats the inspection.\u003c\/p\u003e\n\n\u003ch2\u003eReplacement hardware, and what this is not\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA 1.5 inch clamp takes the 2.25 inch bolt set.\u003c\/li\u003e\n\u003cli\u003eA 2 inch clamp takes the 2.75 inch bolt set.\u003c\/li\u003e\n\u003cli\u003eA 4 inch clamp takes the 3.25 inch bolt set.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMeasure the shaft of the bolt you are replacing, from the base of the head to the end of the thread, not including the head. All four lengths are stocked on our \u003ca href=\"\/products\/high-pressure-tri-clamp-nut-bolt-replacement-set\"\u003e3\/8\"-16 nut and bolt set\u003c\/a\u003e page, along with brass nuts on their own.\u003c\/p\u003e\n\u003cp\u003eThis is not the 6 inch heavy duty clamp. That is \u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003ea separate part\u003c\/a\u003e on M12 x 1.75 hardware, and 3\/8 inch hardware will not fit it.\u003c\/p\u003e\n\u003cp\u003eWhich gasket you run decides whether you pull 30 or 50 in-lbs: \u003ca href=\"\/blogs\/tech\/choosing-the-right-gasket-material-for-tri-clamp-connections-a-comprehensive-comparison-of-buna-n-viton-and-ptfe\"\u003eChoosing the Right Gasket Material for Tri-Clamp Connections\u003c\/a\u003e. Ships from Bend, Oregon, usually the same day.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"1.5\"","offer_id":19765832941625,"sku":"13MHP-G150","price":12.95,"currency_code":"USD","in_stock":true},{"title":"2\"","offer_id":19765851947065,"sku":"13MHP-G200","price":22.95,"currency_code":"USD","in_stock":true},{"title":"4\"","offer_id":19765852012601,"sku":"13MHP-G400","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/med-img-high-pressure-clamps.jpg?v=1692214952"},{"product_id":"6-end-cap","title":"6\" Tri-Clamp End Cap, 374.8 psi, Ball Valve, Gauge and PRV Options","description":"\u003cp\u003eA 6 inch tri clamp end cap in three builds, $399.95 to $1,350, machined and welded in house in Bend, Oregon. These are the caps that go on N.B. Oler material columns, and they are the part you order when you are replacing one on a certified machine.\u003c\/p\u003e\n\n\u003ch2\u003eWhich build do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003cth\u003eWhat it is\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Valve\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e$399.95\u003c\/td\u003e\n\u003ctd\u003eOur standard material vessel bottom cap. If you are replacing the bottom cap on a certified N.B. Oler machine, this is the part.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Valve, Gauge and PRV\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e$949.95\u003c\/td\u003e\n\u003ctd\u003eA standalone build. It does not go on any N.B. Oler system. Customers ask for it and we make it.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2x Ball Valve, Gauge and PRV\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e$1,350\u003c\/td\u003e\n\u003ctd\u003eOur standard material column top cap. One of the two ball valves carries a quick connect body.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCalculated to 374.8 psi (25.8 bar), and here is the calculation\u003c\/h2\u003e\n\u003cp\u003e3P Certz report ECR-250902-R0 runs this cap through ASME as a flat cap: material SA-240 304 stainless, maximum allowable stress 19.7 ksi, 0.437 inch thick, 5.78 inch major dimension, clamped attachment, joint efficiency 1.0. The result is -374.8 psi to 374.8 psi (-25.8 bar to 25.8 bar). Against a 250 psi (17.2 bar) system design pressure that is 124.8 psi (8.6 bar) of margin on pressure and 360.1 psi (24.8 bar) on vacuum.\u003c\/p\u003e\n\u003cp\u003ePenetrations cost you pressure, which is why the three builds are not interchangeable. ECR-250902-R0 works the same 5.78 in flat cap twice, once with four port nozzles and once with six, on two different vessels.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003cth\u003eCase in the report\u003c\/th\u003e\n\u003cth\u003eBefore reduction\u003c\/th\u003e\n\u003cth\u003eReduction\u003c\/th\u003e\n\u003cth\u003eFinal rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 4\u003c\/td\u003e\n\u003ctd\u003eMaterial column head, four port nozzles\u003c\/td\u003e\n\u003ctd\u003e374.8 psi (25.8 bar)\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e374.8 psi (25.8 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eSolvent vessel top cap, six port nozzles\u003c\/td\u003e\n\u003ctd\u003e387.7 psi (26.7 bar)\u003c\/td\u003e\n\u003ctd\u003e133.5 psi (9.2 bar)\u003c\/td\u003e\n\u003ctd\u003e254.3 psi (17.5 bar), only 4.3 psi (0.3 bar) above a 250 psi (17.2 bar) design pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe two primary ratings differ because the report uses a 0.3 attachment factor on the material column head and 0.29 on the solvent vessel top cap. Same thickness, same diameter, same material.\u003c\/p\u003e\n\u003cp\u003eThat is the real reason to buy the configuration you need rather than the busiest one available. The cap carries no temperature rating of its own beyond the material, so your limits are the system's: an N.B. Oler vessel is designed to 200 F (93 C) and the system operates to 122 F (50 C). The lowest applicable limit always governs.\u003c\/p\u003e\n\n\u003ch2\u003eWhat they are built from\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA 6 inch tri clamp cap, drilled and fitted with 3\/8 inch weld bore throughs and compression fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/superlok-ball-valve\"\u003eSuperlok ball valves\u003c\/a\u003e, the blue handled ones, and Superlok 90 degree elbows.\u003c\/li\u003e\n\u003cli\u003eA Superlok quick connect on the 2x build.\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/compound-gauge-2-5-in-300-psi\"\u003ecompound gauge\u003c\/a\u003e reading full vacuum to 300 psi (20.7 bar), $114.95 on its own.\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003e250 psi (17.2 bar) cryogenic relief valve\u003c\/a\u003e on the builds that carry one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery one of those parts is sold separately on this site, so a cap is serviceable rather than disposable.\u003c\/p\u003e\n\n\u003ch2\u003eCertification, lead time and what is not included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThese caps are in 3P Certz report ECR-250902-R0, so a system built with them is certifiable. Tell us who your AHJ is and the quote names the documents you will be handing them.\u003c\/li\u003e\n\u003cli\u003eThe bottom cap and the top cap are items 3 and 4 on Ontario CRN 0H24152.5, Technical Standards and Safety Authority, as part of our 6 in material column assembly, which matters if you are selling or installing north of the border.\u003c\/li\u003e\n\u003cli\u003eMade to order. Nothing on the shelf right now, and build time is normally one to two weeks, six weeks worst case. Ask us before you plan around it and we will tell you what is actually in the rack.\u003c\/li\u003e\n\u003cli\u003eNot included: clamps and gaskets. A 6 inch cap needs a \u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 inch high pressure clamp\u003c\/a\u003e and a 6 inch gasket to mount, both sold separately.\u003c\/li\u003e\n\u003cli\u003eSolvent tank caps, recovery vessel top caps and custom port arrangements are all things we build. They are not listed because the configurations are specific to the system. Email us with what you need and we will quote it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhat a 3P Certz report covers, and what it does not: \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003eCertifications and Compliance\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B. Oler","offers":[{"title":"Ball Valve","offer_id":31257374654521,"sku":"NB-CAP-BV-06IN","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Ball Valve Gauge and PRV","offer_id":31257374720057,"sku":"NB-CAP-BVGP-06IN","price":949.95,"currency_code":"USD","in_stock":true},{"title":"2x Ball Valve Gauge and PRV","offer_id":31257374752825,"sku":"NB-CAP-2BVGP-06IN","price":1350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/6inTopMaterialCap12.png?v=1656617366"},{"product_id":"asme-hydrocarbon-recovery-vessel","title":"12\" ASME Hydrocarbon Recovery Vessel","description":"\u003cp\u003e12 in ASME code stamped hydrocarbon recovery vessel, \u003cstrong\u003e$27,250\u003c\/strong\u003e. 6,665 cubic inches, 250 psi (17.2 bar) at 200 F (93 C) with a 130 psi (9.0 bar) jacket, supplied as a complete column: top cap with fittings, jacketed vessel, bottom sight spool with thermocouple, and a jacketed heated bowl reducer with a valved 3\/8 in pour spout.\u003c\/p\u003e\n\u003cp\u003eThis is the recovery vessel N.B. Oler builds into the \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB system\u003c\/a\u003e, and the \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Double Barrel\u003c\/a\u003e runs two of them. Buy it on its own to add recovery capacity, to replace a legacy 8 in or 10 in vessel, or to put a code stamped vessel into a system that never had one.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. This vessel is welded, pressure tested and stamped in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eDesign calculations are 3P Certz report DCR-210020 Revision 0, prepared by Brian Kester, PE, released 26 May 2021, to ASME BPVC Section VIII Division 1, 2019 edition.\u003c\/li\u003e\n\u003cli\u003eRegistered in Canada under CRN R8841.5 for the inner vessel, with the jacket exempt.\u003c\/li\u003e\n\u003cli\u003ePart number NB-HC-REC-12-R1. Every vessel is serialised and traceable to its material certifications.\u003c\/li\u003e\n\u003cli\u003eZero corrosion allowance, joint efficiency 0.6, formed and welded construction, passivated after pressure test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cp\u003ePressure and temperature figures below are taken directly from the design report, not from a brochure.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$27,250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eNB-HC-REC-12-R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e12 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal volume\u003c\/td\u003e\n\u003ctd\u003e6,665 in3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP, inner vessel\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar) at 200 F (93 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMDMT, inner vessel\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C) at 250 psi (17.2 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrostatic test, inner vessel\u003c\/td\u003e\n\u003ctd\u003e325 psi (22.4 bar) at 70 F (21 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP, jacket\u003c\/td\u003e\n\u003ctd\u003e130 psi (9.0 bar) at 200 F (93 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMDMT, jacket\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C) at 130 psi (9.0 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrostatic test, jacket\u003c\/td\u003e\n\u003ctd\u003e202 psi (13.9 bar) at 70 F (21 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal design pressure\u003c\/td\u003e\n\u003ctd\u003e14.7 psi (1.0 bar), vessel and jacket. Rated for full vacuum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket service\u003c\/td\u003e\n\u003ctd\u003eHot water only, from a temperature control unit. No relief valve by design, 30 psi (2.1 bar) maximum supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSight glass\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar) at -65 C to 232 C (-85 F to 450 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePour spout\u003c\/td\u003e\n\u003ctd\u003eValved 3\/8 in, on a jacketed heated bowl reducer, Superlok fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermocouple\u003c\/td\u003e\n\u003ctd\u003e1\/4 in K-type in the bottom sight spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShell material\u003c\/td\u003e\n\u003ctd\u003eSA-312\/304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead material\u003c\/td\u003e\n\u003ctd\u003eSA-240\/304 stainless, ellipsoidal, top and bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket shell material\u003c\/td\u003e\n\u003ctd\u003eSA-240\/304 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort nozzle material\u003c\/td\u003e\n\u003ctd\u003eSA-479\/316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeld filler\u003c\/td\u003e\n\u003ctd\u003eSFA 5.9 \/ ER308L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorrosion allowance\u003c\/td\u003e\n\u003ctd\u003e0.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCode\u003c\/td\u003e\n\u003ctd\u003eASME Section VIII Division 1, 2019 edition, U stamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign report\u003c\/td\u003e\n\u003ctd\u003e3P Certz DCR-210020-R0, 26 May 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003ctd\u003eCRN R8841.5, inner vessel. Jacket exempt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate\u003c\/td\u003e\n\u003ctd\u003e80 in long x 16 in wide x 22 in tall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e600 lb, LTL freight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003e20 weeks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFITS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB\u003c\/a\u003e and \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Double Barrel\u003c\/a\u003e hydrocarbon systems.\u003c\/li\u003e\n\u003cli\u003eReplaces the legacy 8 in and 10 in recovery vessels, which were never rated for liquid CO2 jacket service.\u003c\/li\u003e\n\u003cli\u003eButane, propane and blends. Not for ethanol service.\u003c\/li\u003e\n\u003cli\u003eCustom top caps and port arrangements are quoted by email rather than sold from this page.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLEAD TIME AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e20 weeks from paid order to shipment.\u003c\/li\u003e\n\u003cli\u003ePaid in full before it ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight, in a crate 80 in long x 16 in wide x 22 in tall weighing 600 lb. Freight is quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCONSUMABLES\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003e250 psi (17.2 bar) cryogenic relief valve\u003c\/a\u003e on this vessel is a 3 to 6 month item, and the high flow \u003ca href=\"\/products\/conrader-srv530-asme-high-flow-relief-valve\"\u003eConrader SRV530\u003c\/a\u003e goes on the top cap. Gaskets are \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton\u003c\/a\u003e on a 3 to 6 month schedule, clamped with \u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamps\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":40714634133703,"sku":"NB-HC-REC-12-R1","price":27250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/RecoveryVessel20_Beauty.png?v=1656454417"},{"product_id":"superlok-ball-valve","title":"Superlok SBV210-S Ball Valve, PEEK Seat, 3\/8\" to 3\/4\", -65 to 450 °F","description":"\u003cp\u003eSuperlok SBV210-S two-piece ball valve, 316 stainless with a PEEK seat, in 3\/8, 1\/2 and 3\/4 inch tube. 1000 psig (69 bar), rated -54 °C to 232 °C (-65 °F to 450 °F). From $89.95.\u003c\/p\u003e\n\u003cp\u003eThe PEEK seat is why this one goes cold. PTFE-seated valves in this class stop well short of it.\u003c\/p\u003e\n\u003ch3\u003eSizes, part numbers and prices\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003cth\u003eOrifice\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8 in tube\u003c\/td\u003e\n\u003ctd\u003eSBV210-S6-PE-BH\u003c\/td\u003e\n\u003ctd\u003e7.5 mm\u003c\/td\u003e\n\u003ctd\u003e$89.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 in tube\u003c\/td\u003e\n\u003ctd\u003eSBV210-S8-PE-BH\u003c\/td\u003e\n\u003ctd\u003e9.0 mm\u003c\/td\u003e\n\u003ctd\u003e$119.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4 in tube\u003c\/td\u003e\n\u003ctd\u003eSBV210-S12-PE-BH\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003e$189.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-piece body, 316 stainless\u003c\/li\u003e\n\u003cli\u003eBall 316 stainless to ASTM A276, PEEK seat, PTFE packing\u003c\/li\u003e\n\u003cli\u003eBlue bar handle, quarter turn, two-way pattern\u003c\/li\u003e\n\u003cli\u003eSuperlok tube compression ends on both ports\u003c\/li\u003e\n\u003cli\u003ePart number key: S is the tube fitting end, PE is the PEEK seat, BH is the bar handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePressure and temperature\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003cth\u003eRating\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull pressure window\u003c\/td\u003e\n\u003ctd\u003e1000 psig (69 bar) from -54 °C to 21 °C (-65 °F to 70 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbove 21 °C (70 °F)\u003c\/td\u003e\n\u003ctd\u003eOperates to 232 °C (450 °F), pressure derates with temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertified minimum\u003c\/td\u003e\n\u003ctd\u003e-54 °C (-65 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eRead the first row rather than the second. The full 1000 psi holds cold, which is where this valve belongs. It still works hot, just not at 1000 psi.\u003c\/p\u003e\n\u003ch3\u003eWhere the -65 °F (-54 °C) comes from\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA signed certificate from the manufacturer, BMT Co. Ltd, dated 27 January 2021, which names SBV210-S6-PE-BH, SBV210-S8-PE-BH and SBV210-S12-PE-BH individually. Ask and we will send you a copy.\u003c\/li\u003e\n\u003cli\u003e3P Certz engineering report ECR-250902-R0, which lists these valves as SBV210-S6, S8 and S12 on certified N.B. Oler builds. More on that in \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003ecertifications and compliance\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 3\/8, 1\/2 and 3\/4 inch Superlok tube compression lines, including cold solvent and recovery service\u003c\/li\u003e\n\u003cli\u003eDoes not fit tri-clamp, NPT or hose. Tube ends only.\u003c\/li\u003e\n\u003cli\u003eThe blue handle identifies it. A black handle is the SBV120 family, which is a different valve.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStocked in Bend, Oregon. We keep every size on the shelf.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"3\/8\"","offer_id":31333241421881,"sku":"SBV210-S-6-PE-BH-S316","price":89.95,"currency_code":"USD","in_stock":true},{"title":"1\/2\"","offer_id":31333241454649,"sku":"SBV210-S-8-PE-BH-S316","price":119.95,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":31333241487417,"sku":"SBV210-S-12-PE-BH-S316","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/2656c919c407d18ebbffb4e3791e8cf8.png?v=1575575170"},{"product_id":"sight-spool-precision-monitoring-made-easy-with-thermocouple","title":"6\" Sight Glass Spool, 6\" Tall, Two 2\" Ports and Thermocouple Port","description":"\u003cp\u003eA 6 inch diameter by 6 inch tall 304 stainless spool with two 2 inch sight ports and a 1\/4 inch thermocouple port, built in house in Bend, Oregon. $600.00.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSight glasses are not included.\u003c\/strong\u003e You are buying the bare spool, with the ports welded in and empty. A complete spool with two windows fitted runs roughly double this price.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne 6 in by 6 in spool, 304 stainless, 0.109 in wall, number 4 polish, 6.567 in across the ferrule\u003c\/li\u003e\n\u003cli\u003eA 6 in tri clamp ferrule on each end\u003c\/li\u003e\n\u003cli\u003eTwo 2 in sight ports on 56 mm ferrules, set at an angle so you look down into the flow rather than straight across it\u003c\/li\u003e\n\u003cli\u003eOne 1\/4 in weld bore through for a thermocouple, fitted on every 6 inch spool we build\u003c\/li\u003e\n\u003cli\u003eMaterials: tube SA-249 TP304, ferrules SA-240 304 plate, bore through SA-479 316. Built to our drawing NB-SP-6-WLD-R1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe thermocouple \u003cstrong\u003eport\u003c\/strong\u003e is included. The probe is not. It is a 1\/4 inch K type, 4 inch length, sold separately.\u003c\/p\u003e\n\n\u003ch2\u003ePressure, temperature and the CRN\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShell envelope, calculated\u003c\/td\u003e\n\u003ctd\u003e-319.7 psi to 764.5 psi (-22.0 bar to 52.7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalculation basis\u003c\/td\u003e\n\u003ctd\u003eASME UG-27 and UG-28, SA-240 304, S 19.7 ksi, 0.115 in wall, 5.78 in inside diameter, seamless, joint efficiency 1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource\u003c\/td\u003e\n\u003ctd\u003e3P Certz report ECR-250902-R0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem design pressure\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi to 250 psi (-1.0 bar to 17.2 bar), leaving 305 psi (21.0 bar) and 514.5 psi (35.5 bar) of margin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitted with a Rayotek window\u003c\/td\u003e\n\u003ctd\u003e300 psi (20.7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitted with a MetaClamp window\u003c\/td\u003e\n\u003ctd\u003e232 psi (16 bar), per Metaglas's published ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum in practice\u003c\/td\u003e\n\u003ctd\u003e-1.0 bar (-15 psi), set by the 2 in sight glass for the whole system. Metaglas publishes -1.0 bar for the MetaClamp and our report puts the Rayotek at -15 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel design temperature\u003c\/td\u003e\n\u003ctd\u003e93 °C (200 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem operating temperature\u003c\/td\u003e\n\u003ctd\u003e50 °C (122 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCanada\u003c\/td\u003e\n\u003ctd\u003eItem 2 on Ontario CRN 0H24152.5, Technical Standards and Safety Authority, as part of our 6 in material column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe shell is a real calculation rather than a catalog figure, and it is never the limit. Once windows are in, the glass governs. The lowest applicable limit always governs.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you also need to finish the build\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 2 inch sight glasses, Rayotek or MetaClamp, both borosilicate in 2205 duplex\u003c\/li\u003e\n\u003cli\u003eTwo 2 inch gaskets, Viton or PTFE envelope\u003c\/li\u003e\n\u003cli\u003eTwo 2 inch high pressure clamps, to hold the windows in\u003c\/li\u003e\n\u003cli\u003eTwo 6 inch gaskets and two 6 inch high pressure clamps, to put the spool into your column\u003c\/li\u003e\n\u003cli\u003eOne 1\/4 inch K type thermocouple probe, 4 inch, if you want temperature\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits any 6 inch tri clamp column or collection vessel. We build a 4 inch version too. There is no 8 inch.\u003c\/p\u003e\n\n\u003ch2\u003eService\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the windows every time the spool is apart, and replace any that are chipped, cracked or scratched rather than running them\u003c\/li\u003e\n\u003cli\u003eGaskets are consumable. Keep spares for both the 2 inch and the 6 inch joints\u003c\/li\u003e\n\u003cli\u003eOur operators manual has you observe the oil through the sight glasses before opening a collection valve, and this is the part that makes that possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt in house in Bend, Oregon.\u003c\/p\u003e","brand":"N.B. Oler","offers":[{"title":"Default Title","offer_id":31335052148793,"sku":"NB-SPL-SIGHT-06IN","price":600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/6inSightSpoolWeldment7_Beauty.png?v=1684275070"},{"product_id":"20-lb-extraction-system","title":"20 LB Closed Loop Extractor, ASME Certified Hydrocarbon System","description":"\u003cp\u003eASME certified 20 LB passive closed loop hydrocarbon extraction system, \u003cstrong\u003e$160,000\u003c\/strong\u003e. Two 6 in x 48 in jacketed material columns, a 12 in x 52 in ASME recovery vessel, a 100 lb ASME solvent tank and a 6 in x 24 in molecular sieve on a modular rack.\u003c\/p\u003e\n\u003cp\u003eRecovery is fully passive, so there is no solvent pump to service. The rack is laid out so a second pair of columns or a CRC column can be added later without rebuilding the skid. This is the system most operations should start with.\u003c\/p\u003e\n\n\u003ch3\u003eTHE OPERATING ENVELOPE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe gasket sets the cold limit on this machine, not the steel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csvg viewbox=\"0 0 720 250\" role=\"img\" aria-label=\"Temperature range chart. The vessels run from -155 F to 200 F. PTFE or Tuf-Steel gaskets limit the system to -65 F to 122 F. Viton or Buna-N gaskets limit it to -40 F to 122 F.\" style=\"width:100%;height:auto;max-width:720px;font-family:inherit\"\u003e\u003ctext x=\"60\" y=\"22\" font-size=\"15\" fill=\"currentColor\"\u003eVessels, the steel itself\u003c\/text\u003e\u003crect x=\"67.9\" y=\"30\" width=\"560.5\" height=\"20\" rx=\"3\" fill=\"#1f3a5f\"\u003e\u003c\/rect\u003e\u003ctext x=\"61.9\" y=\"45\" font-size=\"13\" fill=\"currentColor\" text-anchor=\"end\"\u003e-155 F\u003c\/text\u003e\u003ctext x=\"634.4\" y=\"45\" font-size=\"13\" fill=\"currentColor\"\u003e200 F\u003c\/text\u003e\u003ctext x=\"60\" y=\"84\" font-size=\"15\" fill=\"currentColor\"\u003ePTFE or Tuf-Steel gaskets\u003c\/text\u003e\u003crect x=\"210.0\" y=\"92\" width=\"295.3\" height=\"20\" rx=\"3\" fill=\"#4a7ba7\"\u003e\u003c\/rect\u003e\u003ctext x=\"204.0\" y=\"107\" font-size=\"13\" fill=\"currentColor\" text-anchor=\"end\"\u003e-65 F\u003c\/text\u003e\u003ctext x=\"511.3\" y=\"107\" font-size=\"13\" fill=\"currentColor\"\u003e122 F\u003c\/text\u003e\u003ctext x=\"60\" y=\"146\" font-size=\"15\" fill=\"currentColor\"\u003eViton or Buna-N gaskets\u003c\/text\u003e\u003crect x=\"249.5\" y=\"154\" width=\"255.8\" height=\"20\" rx=\"3\" fill=\"#9bb8d3\"\u003e\u003c\/rect\u003e\u003ctext x=\"243.5\" y=\"169\" font-size=\"13\" fill=\"currentColor\" text-anchor=\"end\"\u003e-40 F\u003c\/text\u003e\u003ctext x=\"511.3\" y=\"169\" font-size=\"13\" fill=\"currentColor\"\u003e122 F\u003c\/text\u003e\u003cline x1=\"60\" y1=\"210\" x2=\"660\" y2=\"210\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003cline x1=\"75.8\" y1=\"210\" x2=\"75.8\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"75.8\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e-150\u003c\/text\u003e\u003cline x1=\"154.7\" y1=\"210\" x2=\"154.7\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"154.7\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e-100\u003c\/text\u003e\u003cline x1=\"233.7\" y1=\"210\" x2=\"233.7\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"233.7\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e-50\u003c\/text\u003e\u003cline x1=\"312.6\" y1=\"210\" x2=\"312.6\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"312.6\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e0\u003c\/text\u003e\u003cline x1=\"391.6\" y1=\"210\" x2=\"391.6\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"391.6\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e50\u003c\/text\u003e\u003cline x1=\"470.5\" y1=\"210\" x2=\"470.5\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"470.5\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e100\u003c\/text\u003e\u003cline x1=\"549.5\" y1=\"210\" x2=\"549.5\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"549.5\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e150\u003c\/text\u003e\u003cline x1=\"628.4\" y1=\"210\" x2=\"628.4\" y2=\"215\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"628.4\" y=\"230\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e200\u003c\/text\u003e\u003ctext x=\"360\" y=\"248\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003edegrees F\u003c\/text\u003e\u003c\/svg\u003e\n\u003cp\u003ePick the gasket for the temperature you actually run. Viton or Buna-N takes you to -40 F (-40 C), which covers most work. PTFE or Tuf-Steel takes you to -65 F (-54 C), where the ball valves become the limit. The vessels themselves are good to -155 F (-104 C), so they are never what stops you. See \u003ca href=\"\/blogs\/tech\/choosing-the-right-gasket-material-for-tri-clamp-connections-a-comprehensive-comparison-of-buna-n-viton-and-ptfe\"\u003echoosing a gasket material\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe -40 F figure is from 3P Certz, confirmed September 2026. The -65 F figure is from ECR-200014-R2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree pressure zones, and every one is rated well below what the steel calculates to.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csvg viewbox=\"0 0 720 300\" role=\"img\" aria-label=\"Pressure chart from 3P Certz report ECR-200014-R2. Process vessels have a maximum allowable working pressure of 250 psi or 17.2 bar against a calculated design ceiling of 295 psi or 20.3 bar, limited by the flat cap. The solvent tank jacket is 100 psi or 6.9 bar against a ceiling of 322.8 psi or 22.3 bar, limited by the mid section. The material column jackets are 22 psi or 1.5 bar against a ceiling of 145 psi or 10.0 bar, also limited by the mid section.\" style=\"width:100%;height:auto;max-width:720px;font-family:inherit\"\u003e\u003ctext x=\"60\" y=\"34\" font-size=\"15\" fill=\"currentColor\"\u003eProcess vessels\u003c\/text\u003e\u003ctext x=\"660\" y=\"34\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.7\" text-anchor=\"end\"\u003elimited by the flat cap\u003c\/text\u003e\u003crect x=\"60\" y=\"42\" width=\"520.6\" height=\"22\" rx=\"3\" fill=\"#c3d4e4\"\u003e\u003c\/rect\u003e\u003crect x=\"60\" y=\"42\" width=\"441.2\" height=\"22\" rx=\"3\" fill=\"#1f3a5f\"\u003e\u003c\/rect\u003e\u003ctext x=\"493.2\" y=\"58\" font-size=\"13\" font-weight=\"600\" fill=\"#ffffff\" text-anchor=\"end\"\u003e250 psi\u003c\/text\u003e\u003ctext x=\"588.6\" y=\"58\" font-size=\"13\" fill=\"currentColor\"\u003e295 psi\u003c\/text\u003e\u003ctext x=\"60\" y=\"100\" font-size=\"15\" fill=\"currentColor\"\u003eSolvent tank jacket\u003c\/text\u003e\u003ctext x=\"660\" y=\"100\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.7\" text-anchor=\"end\"\u003elimited by the mid section\u003c\/text\u003e\u003crect x=\"60\" y=\"108\" width=\"569.6\" height=\"22\" rx=\"3\" fill=\"#c3d4e4\"\u003e\u003c\/rect\u003e\u003crect x=\"60\" y=\"108\" width=\"176.5\" height=\"22\" rx=\"3\" fill=\"#1f3a5f\"\u003e\u003c\/rect\u003e\u003ctext x=\"228.5\" y=\"124\" font-size=\"13\" font-weight=\"600\" fill=\"#ffffff\" text-anchor=\"end\"\u003e100 psi\u003c\/text\u003e\u003ctext x=\"637.6\" y=\"124\" font-size=\"13\" fill=\"currentColor\"\u003e322.8 psi\u003c\/text\u003e\u003ctext x=\"60\" y=\"166\" font-size=\"15\" fill=\"currentColor\"\u003eMaterial column jackets\u003c\/text\u003e\u003ctext x=\"660\" y=\"166\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.7\" text-anchor=\"end\"\u003elimited by the mid section\u003c\/text\u003e\u003crect x=\"60\" y=\"174\" width=\"255.9\" height=\"22\" rx=\"3\" fill=\"#c3d4e4\"\u003e\u003c\/rect\u003e\u003crect x=\"60\" y=\"174\" width=\"38.8\" height=\"22\" rx=\"3\" fill=\"#1f3a5f\"\u003e\u003c\/rect\u003e\u003ctext x=\"90.8\" y=\"190\" font-size=\"13\" font-weight=\"600\" fill=\"#ffffff\" text-anchor=\"end\"\u003e22 psi\u003c\/text\u003e\u003ctext x=\"323.9\" y=\"190\" font-size=\"13\" fill=\"currentColor\"\u003e145 psi\u003c\/text\u003e\u003cline x1=\"60\" y1=\"236\" x2=\"660\" y2=\"236\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003cline x1=\"60.0\" y1=\"236\" x2=\"60.0\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"60.0\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e0\u003c\/text\u003e\u003cline x1=\"148.2\" y1=\"236\" x2=\"148.2\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"148.2\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e50\u003c\/text\u003e\u003cline x1=\"236.5\" y1=\"236\" x2=\"236.5\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"236.5\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e100\u003c\/text\u003e\u003cline x1=\"324.7\" y1=\"236\" x2=\"324.7\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"324.7\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e150\u003c\/text\u003e\u003cline x1=\"412.9\" y1=\"236\" x2=\"412.9\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"412.9\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e200\u003c\/text\u003e\u003cline x1=\"501.2\" y1=\"236\" x2=\"501.2\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"501.2\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e250\u003c\/text\u003e\u003cline x1=\"589.4\" y1=\"236\" x2=\"589.4\" y2=\"241\" stroke=\"currentColor\" stroke-opacity=\"0.35\"\u003e\u003c\/line\u003e\u003ctext x=\"589.4\" y=\"256\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003e300\u003c\/text\u003e\u003ctext x=\"360\" y=\"274\" font-size=\"12\" fill=\"currentColor\" fill-opacity=\"0.75\" text-anchor=\"middle\"\u003epsi\u003c\/text\u003e\u003crect x=\"60\" y=\"292\" width=\"14\" height=\"14\" rx=\"2\" fill=\"#1f3a5f\"\u003e\u003c\/rect\u003e\u003ctext x=\"80\" y=\"304\" font-size=\"13\" fill=\"currentColor\"\u003eMAWP, the certified working pressure\u003c\/text\u003e\u003crect x=\"370\" y=\"292\" width=\"14\" height=\"14\" rx=\"2\" fill=\"#c3d4e4\"\u003e\u003c\/rect\u003e\u003ctext x=\"390\" y=\"304\" font-size=\"13\" fill=\"currentColor\"\u003eCalculated design ceiling\u003c\/text\u003e\u003c\/svg\u003e\n\u003cp\u003eThe solid bar is the MAWP, the maximum allowable working pressure the vessel is certified to and the figure that governs. The lighter bar is the pressure ASME BPVC VIII Division 1 calculates the steel to, before the working rating is set. The material column jacket carries a 22 psi (1.5 bar) working rating against a 145 psi (10.0 bar) calculated ceiling, and the solvent tank jacket carries 100 psi (6.9 bar) against 322.8 psi (22.3 bar). That margin is deliberate.\u003c\/p\u003e\u003cp\u003eEvery figure is transcribed from 3P Certz report ECR-200014-R2, released 23 September 2021, not from a brochure. Design temperature is -155 F to 200 F (-104 C to 93 C) and MDMT is -155 F (-104 C).\u003c\/p\u003e\n\n\u003ch3\u003eWHAT DECIDES IT\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$160,000, on a written quote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity per run\u003c\/td\u003e\n\u003ctd\u003e9,000 g (19.8 lb) dry, or 16,329 g (36 lb) live resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead time\u003c\/td\u003e\n\u003ctd\u003e20 weeks from paid order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial columns\u003c\/td\u003e\n\u003ctd\u003eTwo, 6 in x 48 in, jacketed, with sight spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery\u003c\/td\u003e\n\u003ctd\u003eFully passive, no solvent pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2, liquid nitrogen or chiller. About 75 L of liquid CO2 per run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003e18 to 24 kW hot water, supplied separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine footprint\u003c\/td\u003e\n\u003ctd\u003e30.25 in x 58 in x 86 in, fits a standard door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate\u003c\/td\u003e\n\u003ctd\u003e70.5 in long x 63 in wide x 94.75 in tall, 1,850 lb, LTL freight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum allowable quantity\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eASME Section VIII Div 1 U stamp, plus P.E. report and Certificate of Conformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eNB-HC-SYS-20LB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePriced separately and quoted on the same sheet: a \u003ca href=\"\/products\/6-diameter-stand-alone-crc-column\"\u003estand-alone CRC column\u003c\/a\u003e, a \u003ca href=\"\/products\/secondary-material-vessel-rack\"\u003esecondary material column rack\u003c\/a\u003e, a \u003ca href=\"\/products\/tube-in-shell-condenser\"\u003etube in shell condenser\u003c\/a\u003e, an extra \u003ca href=\"\/products\/hydrocarbon-solvent-tanks\"\u003e100 lb ASME solvent tank\u003c\/a\u003e and a \u003ca href=\"\/products\/asme-hydrocarbon-recovery-vessel\"\u003e12 in ASME recovery vessel\u003c\/a\u003e. Need more throughput? See the \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Double Barrel\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eHOW TO BUY IT\u003c\/h3\u003e\n\u003cp\u003eThe price is published so you can budget against it. The order goes out on a written quote rather than a cart checkout, because the configuration, the freight and your site all change what it says. \u003cstrong\u003eCall the shop at 541-330-6409.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThree things get a quote written:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThroughput.\u003c\/strong\u003e Material per run and runs per day. That settles 20 LB against 40 LB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour room.\u003c\/strong\u003e Floor space, ceiling height and the width of the door the crate goes through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour permits.\u003c\/strong\u003e Who your AHJ is, whether the room is C1D1 classified, and whether anyone has asked for ASME stamps, a PE report or a Certificate of Conformance. This system carries all three.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou get back the configuration, the options, the freight basis and the lead time. Nothing is built until it is signed and paid. Paid in full before shipment, and we do not offer net 30 or purchase order terms. Freight is quoted after the crate is measured, never charged at checkout. Gaskets, PRVs, fittings and valves for this system are usually in stock and ship on their own.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT HERE, AND WHAT COMES WITH IT\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. The pressure vessels are welded in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eEvery stainless part is fabricated here. Gaskets, filter cartridges and filter socks are purchased parts and are not represented as ours.\u003c\/li\u003e\n\u003cli\u003eMost companies selling extraction equipment are consultants who run these systems. We build them, so the people who welded your vessel are the people who answer the phone.\u003c\/li\u003e\n\u003cli\u003eCertified under 3P Certz ECR-200014-R2, released 23 September 2021, with Certificate of Conformance 3PC0930. Full P.E. report included for engineering review and permitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnsite training and commissioning are part of the delivery\u003c\/strong\u003e, not optional paperwork. Systems run or modified by outside consultants without retraining are the ones that come back damaged.\u003c\/li\u003e\n\u003cli\u003eIn the crate: Hydrocarbon Operators Manual, What To Expect guide, onsite training and commissioning checklist, safety and process training with a certification exam and certificate, and an operators run log.\u003c\/li\u003e\n\u003cli\u003eFree on this site: the Sintered Filter Tech Specs and the technical briefs, including \u003ca href=\"\/blogs\/tech\/what-crc-media-should-you-use\"\u003eCRC media\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/molecular-sieves\"\u003emolecular sieves\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/diamond-formation\"\u003ediamond formation\u003c\/a\u003e and \u003ca href=\"\/blogs\/tech\/storage-for-thc-cbd-cbn\"\u003ecannabinoid storage\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFULL SPECIFICATION\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery vessel\u003c\/td\u003e\n\u003ctd\u003e12 in x 52 in, jacketed, ASME certified, design report DCR-210020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tank\u003c\/td\u003e\n\u003ctd\u003e100 lb, ASME certified, design report DCR-200101-R1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve\u003c\/td\u003e\n\u003ctd\u003e6 in x 24 in, 10 lb charge of 4A beads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP, process vessels\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar), with 250 psi relief valves at 980 SCFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalculated ceiling, process vessels\u003c\/td\u003e\n\u003ctd\u003e295 psi (20.3 bar), limited by the flat cap, per ECR-200014-R2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tank jacket\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar) MAWP, with 22 psi (1.5 bar) and 100 psi relief valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalculated ceiling, solvent tank jacket\u003c\/td\u003e\n\u003ctd\u003e322.8 psi (22.3 bar), limited by the mid section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial column jackets\u003c\/td\u003e\n\u003ctd\u003e22 psi (1.5 bar) MAWP, with 22 psi relief valves at 32 SCFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalculated ceiling, column jackets\u003c\/td\u003e\n\u003ctd\u003e145 psi (10.0 bar), limited by the mid section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent vessel\u003c\/td\u003e\n\u003ctd\u003eASME U stamped. 105 lb maximum solvent capacity, propane or butane, per ECR-200014-R2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMDMT\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign temperature\u003c\/td\u003e\n\u003ctd\u003e-155 F to 200 F (-104 C to 93 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem range, Buna-N or Viton\u003c\/td\u003e\n\u003ctd\u003e-40 F to 122 F (-40 C to 50 C), gasket limited. 3P Certz, confirmed September 2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem range, PTFE or Tuf-Steel\u003c\/td\u003e\n\u003ctd\u003e-65 F to 122 F (-54 C to 50 C), ball valve limited, per ECR-200014-R2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eIn-line stainless sintered filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification report\u003c\/td\u003e\n\u003ctd\u003e3P Certz ECR-200014-R2, 23 September 2021\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertificate of Conformance\u003c\/td\u003e\n\u003ctd\u003e3P Certz 3PC0930\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSERVICE SCHEDULE, FOR OWNERS\u003c\/h3\u003e\n\u003cp\u003eQuantities are per 20 LB system. Torque specs, cleaning procedures and the complete parts list are in the Operators Manual that ships with the system. If you are still deciding whether to buy, you can skip this.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePart\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e6 in gasket, \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton\u003c\/a\u003e or \u003ca href=\"\/products\/tri-clamp-buna-n-gasket\"\u003eBuna-N\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003e22, plus spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e2 in gasket\u003c\/td\u003e\n\u003ctd\u003e6, plus 1 spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e1.5 in gasket\u003c\/td\u003e\n\u003ctd\u003e4, plus 1 spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003eCryogenic PRV, 250 psi (17.2 bar)\u003c\/a\u003e, on the vessels\u003c\/td\u003e\n\u003ctd\u003e6, plus 1 spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003eCryogenic PRV, 22 psi (1.5 bar)\u003c\/a\u003e, liquid CO2 injection line and jacket inlets\u003c\/td\u003e\n\u003ctd\u003e3, plus 1 spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003eCryogenic PRV, 100 psi (6.9 bar)\u003c\/a\u003e, solvent jacket\u003c\/td\u003e\n\u003ctd\u003e1, plus 1 spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003eHigh flow \u003ca href=\"\/products\/conrader-srv530-asme-high-flow-relief-valve\"\u003eConrader SRV530\u003c\/a\u003e, solvent tank top and recovery vessel top only\u003c\/td\u003e\n\u003ctd\u003e2, plus a spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 months\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamp\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e10, plus 2 spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eBrass tri clamp nuts\u003c\/a\u003e, regardless of condition\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eTri clamp bolts\u003c\/a\u003e, regardless of condition\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/high-performance-ptfe-hose-with-compression-fitting-tube-adaptor\"\u003ePTFE hose adapter ends\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eOne per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003eQuick connect body rebuilds\u003c\/td\u003e\n\u003ctd\u003eAs fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeekly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/molecular-sieve-beads-4a-pore-size\"\u003e4A molecular sieve beads\u003c\/a\u003e, 4x8 mesh\u003c\/td\u003e\n\u003ctd\u003e10 lb per 6 in x 24 in column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperator choice\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/6-inch-filter-sock\"\u003e6 in filter socks\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 24 in or one 48 in per column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaned, not replaced\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003eSintered tri clamp filters\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e50 and 20 micron on the material columns, two 5 micron plus one 1 micron on the CRC, 10 micron either side of the sieve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eReplace gaskets on schedule regardless of appearance, and immediately on cracking, tearing, splitting or permanent deformation.\u003c\/li\u003e\n\u003cli\u003eTorque 30 in-lbs on elastomeric gaskets, 50 in-lbs on rigid.\u003c\/li\u003e\n\u003cli\u003ePick Viton or Buna-N and stay with it. We recommend Viton because it seals better.\u003c\/li\u003e\n\u003cli\u003eKeep a second set of sintered filters so one runs while the other is in the ultrasonic.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":31384414748729,"sku":"NB-HC-SYS-20LB","price":160000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/20LBHydrocarbon22_Beauty.png?v=1656525698"},{"product_id":"sight-spool-with-optimal-k-type-thermocouple-monitoring","title":"4\" Sight Glass Spool, 6\" Tall, Two 2\" Ports and Thermocouple Port","description":"\u003cp\u003eA 4 inch diameter by 6 inch tall 304 stainless spool with two 2 inch sight ports and a 1\/4 inch thermocouple port, built in house in Bend, Oregon. $300.00.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSight glasses are not included.\u003c\/strong\u003e You are buying the bare spool, with the ports welded in and empty. A pair of windows adds about $900.\u003c\/p\u003e\n\n\u003ch2\u003eWhat is in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne 4 in by 6 in spool, 304 stainless, 0.085 in wall, number 4 polish, 4.685 in across the ferrule\u003c\/li\u003e\n\u003cli\u003eA 4 in tri clamp ferrule on each end\u003c\/li\u003e\n\u003cli\u003eTwo 2 in sight ports on 56 mm ferrules, set at an angle so you look down into the flow rather than straight across it\u003c\/li\u003e\n\u003cli\u003eOne 1\/4 in weld bore through for a thermocouple, plus a 1\/4 in plug for it, so the spool runs sealed out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe thermocouple probe is not included. It is a 1\/4 inch K type, 4 inch length, sold separately. It drops into a 4 inch column and lets you watch the run: color, consistency, volume, whether solvent is still flashing off.\u003c\/p\u003e\n\n\u003ch2\u003ePressure and temperature\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBare shell\u003c\/td\u003e\n\u003ctd\u003e304 stainless, 0.085 in wall. Not the limit in your system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitted with a Rayotek window\u003c\/td\u003e\n\u003ctd\u003e300 psi (20.7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitted with a MetaClamp window\u003c\/td\u003e\n\u003ctd\u003e232 psi (16 bar), per Metaglas's published ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum\u003c\/td\u003e\n\u003ctd\u003e-1.0 bar (-15 psi), set by the 2 in sight glass for the whole system. Metaglas publishes -1.0 bar for the MetaClamp and our report puts the Rayotek at -15 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem design pressure\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar) on an N.B. Oler hydrocarbon system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel design temperature\u003c\/td\u003e\n\u003ctd\u003e93 °C (200 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem operating temperature\u003c\/td\u003e\n\u003ctd\u003e50 °C (122 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOnce windows are in, the glass governs and not the shell. The lowest applicable limit always governs.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you also need to finish the build\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 2 inch sight glasses, Rayotek or MetaClamp, both borosilicate in 2205 duplex\u003c\/li\u003e\n\u003cli\u003eTwo 2 inch gaskets, Viton or PTFE envelope\u003c\/li\u003e\n\u003cli\u003eTwo 2 inch high pressure clamps, to hold the windows in\u003c\/li\u003e\n\u003cli\u003eTwo 4 inch gaskets and two 4 inch clamps, to put the spool into your column\u003c\/li\u003e\n\u003cli\u003eOne 1\/4 inch K type thermocouple probe, 4 inch, if you want temperature. The port ships plugged if you do not\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe build a 6 inch version of this spool too, same construction. There is no 3 inch and no 8 inch.\u003c\/p\u003e\n\n\u003ch2\u003eService\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the windows every time the spool is apart, and replace any that are chipped, cracked or scratched rather than running them\u003c\/li\u003e\n\u003cli\u003eGaskets are consumable. Keep spares for both the 2 inch and the 4 inch joints\u003c\/li\u003e\n\u003cli\u003eOur operators manual has you observe the oil through the sight glasses before opening a collection valve, and this is the part that makes that possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt in house in Bend, Oregon.\u003c\/p\u003e","brand":"N.B. Oler","offers":[{"title":"Default Title","offer_id":31393033322553,"sku":"NB-SPL-SIGHT-04IN","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/4inSightSpoolWeldment4_Beauty.png?v=1684274269"},{"product_id":"flashlight-intrinsically-safe-c1d1-rated","title":"Intrinsically Safe C1D1 Flashlight, UL 913, Class I Division 1","description":"\u003cp\u003eAn intrinsically safe dual-light flashlight for Class I Division 1 rooms, $65.00, stocked in Bend, Oregon. It takes 3 AA batteries and they are not included.\u003c\/p\u003e\n\u003cp\u003eListed to UL 913 as intrinsically safe apparatus for Class I Division 1. This is the light we sell for extraction booths, and it is the one our flashlight mount is cut for.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eListing\u003c\/td\u003e\n\u003ctd\u003eUL 913, intrinsically safe, Class I Division 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight source\u003c\/td\u003e\n\u003ctd\u003eDual LED, a focused spot and a wide flood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBatteries\u003c\/td\u003e\n\u003ctd\u003e3 AA, not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eTwo magnets and a pocket clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$65.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIntrinsically safe, not explosion proof\u003c\/h3\u003e\n\u003cp\u003ePeople asking for an explosion proof flashlight almost always want this one. Explosion proof means a housing strong enough to contain an ignition inside it. Intrinsically safe means the tool cannot release enough energy to start one in the first place.\u003c\/p\u003e\n\u003cp\u003eFor a hand light in a C1D1 booth, intrinsic safety is the right protection method, and UL 913 is the standard that covers it.\u003c\/p\u003e\n\n\u003ch3\u003eCheck the marking against your permit\u003c\/h3\u003e\n\u003cp\u003eThe group letters and the temperature code are printed on the light body, and they differ between variants of this light. If your permit, your inspector or your insurer names a specific marking, call the shop at 541-330-6409 and we will read the body of the one on the shelf before you order.\u003c\/p\u003e\n\u003cp\u003eIt is a hand tool. Permanent lighting in a Class I Division 1 space is a separate fixed listed luminaire and this does not replace it.\u003c\/p\u003e\n\n\u003ch3\u003eThe mount\u003c\/h3\u003e\n\u003cp\u003eThere is a \u003ca href=\"\/products\/c1d1-flashlight-mount\"\u003eC1D1 flashlight mount\u003c\/a\u003e that holds this light on a 2 inch high pressure tri clamp on top of a vessel, so the beam goes down through the sight glass and lights the inside of the column. Buying the light and the mount together saves $8.00 against buying them separately.\u003c\/p\u003e\n\u003cp\u003eMore on where electrical equipment is allowed to sit in a classified room in \u003ca href=\"\/blogs\/tech\/site-requirements-and-utilities-for-a-hydrocarbon-system\"\u003eSite Requirements and Utilities\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":41119778373831,"sku":"NBO-FL-C1D1","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/YellowFlashlight.jpg?v=1632955349"},{"product_id":"thermocouple-probe-k-type","title":"1\/4\" K-Type Thermocouple Probe, 304 SS, Ungrounded, 1\" to 64\"","description":"\u003cp\u003eA 1\/4 inch K-type thermocouple probe with a 304 stainless stem and an ungrounded junction, in lengths from 1 inch to 64 inches. $80.00 to $260.00, stocked in Bend, Oregon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNonincendive for Class I, Division 1 locations per NFPA 70, Article 500.7\u003c\/strong\u003e, as documented in 3P Certz engineering report ECR-200023-R0. If your room is C1D1 rated, so is this probe.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4 in. stem, 304 stainless, mineral insulated\u003c\/li\u003e\n\u003cli\u003eUngrounded junction, single element, so the sensing element stays electrically isolated from the sheath and from your vessel. On a system where static discharge is a named hazard, that matters\u003c\/li\u003e\n\u003cli\u003eStandard size male K plug on top, not bare leads and not mini-K\u003c\/li\u003e\n\u003cli\u003eSheath rated to 899 °C (1650 °F). The plug end is the lower of the two limits, so keep it out of the heat\u003c\/li\u003e\n\u003cli\u003eBare stem. No compression fitting, no thermowell, no process connection of any kind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLengths and prices\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-1\u003c\/td\u003e\n\u003ctd\u003e$80.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-4\u003c\/td\u003e\n\u003ctd\u003e$86.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-6\u003c\/td\u003e\n\u003ctd\u003e$94.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-8\u003c\/td\u003e\n\u003ctd\u003e$110.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e48 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-48\u003c\/td\u003e\n\u003ctd\u003e$199.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e51 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-51\u003c\/td\u003e\n\u003ctd\u003e$210.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e58 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-58\u003c\/td\u003e\n\u003ctd\u003e$245.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e64 in.\u003c\/td\u003e\n\u003ctd\u003eThermo-Probe-64\u003c\/td\u003e\n\u003ctd\u003e$260.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e64 inch is the longest length we stock, and it is the one that goes on a tube in shell condenser. Other lengths are built to order. Tell us the depth you need.\u003c\/p\u003e\n\u003ch3\u003eChoosing a length\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEvery vessel with a sight glass takes one, so most systems take several\u003c\/li\u003e\n\u003cli\u003e4 in. is the standard on inline sight glasses and sight spools\u003c\/li\u003e\n\u003cli\u003eSolvent tanks are all different depths. Measure from the fitting face to where you want to read, rather than guessing from the vessel size\u003c\/li\u003e\n\u003cli\u003eCustom lengths are built to order and are not returnable, so measure twice\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts through a 1\/4 in. weld bore-through fitting, which is a separate part\u003c\/li\u003e\n\u003cli\u003eDoes not thread into an NPT port on its own, and does not include a compression fitting or a thermowell\u003c\/li\u003e\n\u003cli\u003eTo log a run you also need the K to mini-K extension cable. The probe ends in a standard male K plug and our four channel loggers take mini, so the cable is the adapter between them, not an accessory. We build them here\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStocked lengths usually ship the same day. Built-to-order lengths run 5 to 7 days. More on how these systems are certified in \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003eCertifications and Compliance\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"1\"","offer_id":31413907193913,"sku":"Thermo-Probe-1","price":80.0,"currency_code":"USD","in_stock":true},{"title":"4\"","offer_id":31413907226681,"sku":"Thermo-Probe-4","price":86.0,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":31413907259449,"sku":"Thermo-Probe-6","price":94.0,"currency_code":"USD","in_stock":true},{"title":"8\"","offer_id":31413907324985,"sku":"Thermo-Probe-8","price":110.0,"currency_code":"USD","in_stock":true},{"title":"48\"","offer_id":44506504986823,"sku":"Thermo-Probe-48","price":199.0,"currency_code":"USD","in_stock":true},{"title":"51\"","offer_id":44506506133703,"sku":"Thermo-Probe-51","price":210.0,"currency_code":"USD","in_stock":true},{"title":"58\"","offer_id":44506506526919,"sku":"Thermo-Probe-58","price":245.0,"currency_code":"USD","in_stock":true},{"title":"64\"","offer_id":67796004339911,"sku":"Thermo-Probe-64","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/DSC00566.jpg?v=1632759468"},{"product_id":"k-to-mini-k-thermocouple-lines","title":"K to Mini-K Thermocouple Cable, PTFE, Made to Order, 6 ft to 25 ft","description":"\u003cp\u003eType K thermocouple extension cable, built by hand in our shop, 6 to 25 feet off the list and any length you ask for. $134.95 to $180.95.\u003c\/p\u003e\n\u003cp\u003eThe standard build is a standard size female jack on the probe end and a mini male plug on the logger end. Our probes end in a standard male plug and our four channel loggers take mini, so \u003cstrong\u003ethis cable is the adapter between them, not an accessory\u003c\/strong\u003e. A probe and a logger bought without it are two things that do not connect.\u003c\/p\u003e\n\u003ch3\u003eWhy these are long\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn extraction room running propane, butane or isobutane is a Class I Division 1 space, and electrical equipment inside it is expected to carry a C1D1 listing. A four channel SD card logger does not have one\u003c\/li\u003e\n\u003cli\u003eOur certifier, 3P Certz, has determined that on our systems the logger may stay in the booth as long as it is at least 12 feet from the machine, because the device sits only marginally over the intrinsic safety energy limit. Twelve feet is the floor\u003c\/li\u003e\n\u003cli\u003eIf your room will not give you that, the logger goes outside the wall instead and the run gets longer again. Confirm either arrangement with whoever certifies your own room before you rely on it\u003c\/li\u003e\n\u003cli\u003eSo measure probe to logger by the route the cable will actually take. A 6 foot cable does not cover 12 feet, and it will not reach through a wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLengths and prices\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 ft\u003c\/td\u003e\n\u003ctd\u003eNB-TC-CBL-06FT\u003c\/td\u003e\n\u003ctd\u003e$134.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 ft\u003c\/td\u003e\n\u003ctd\u003eNB-TC-CBL-10FT\u003c\/td\u003e\n\u003ctd\u003e$144.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 ft\u003c\/td\u003e\n\u003ctd\u003eNB-TC-CBL-15FT\u003c\/td\u003e\n\u003ctd\u003e$156.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003ctd\u003eNB-TC-CBL-20FT\u003c\/td\u003e\n\u003ctd\u003e$168.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 ft\u003c\/td\u003e\n\u003ctd\u003eNB-TC-CBL-25FT\u003c\/td\u003e\n\u003ctd\u003e$180.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eNot on the list? Every one of these is built to order anyway, so ask for the run you need. Four foot, thirty foot, whatever the distance is.\u003c\/p\u003e\n\u003ch3\u003eWhat it is made of\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePTFE on the conductor and PTFE on the jacket, 20 AWG solid. Most extension cable sold for this job is PVC, rated to about 105 °C (221 °F), and PVC does not do well around solvent. PTFE is good to around 260 °C (500 °F) and does not care\u003c\/li\u003e\n\u003cli\u003eThe connector body is the temperature limit of the assembly, not the wire. A standard thermocouple connector is molded in glass filled nylon, a class of part rated to about 180 °C (356 °F), so treat the whole cable as a 180 °C (356 °F) assembly. Anyone quoting a type K cable at 1,260 °C (2,300 °F) is quoting the bare alloy, not the thing in the box\u003c\/li\u003e\n\u003cli\u003eNot shielded\u003c\/li\u003e\n\u003cli\u003eLength is measured end to end, including the connectors\u003c\/li\u003e\n\u003cli\u003eBuilt one at a time on the bench, about 15 to 20 minutes each, which is why any length is available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnds, any combination you need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard K male, standard K female, mini K male, mini K female, any two on the same cable\u003c\/li\u003e\n\u003cli\u003eNobody else offers this, which is why people call us for the odd one. Tell us what you are plugging into at each end\u003c\/li\u003e\n\u003cli\u003eNo bare or stripped ends unless you ask for them\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt to order in Bend, Oregon. Give us a length and two ends. More on where electrical equipment can sit in a classified room in \u003ca href=\"\/blogs\/tech\/site-requirements-and-utilities-for-a-hydrocarbon-system\"\u003eSite Requirements and Utilities for a Hydrocarbon System\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"6 ft","offer_id":31414362013753,"sku":"NB-TC-CBL-06FT","price":134.95,"currency_code":"USD","in_stock":true},{"title":"10 ft","offer_id":31414362046521,"sku":"NB-TC-CBL-10FT","price":144.95,"currency_code":"USD","in_stock":true},{"title":"15 ft","offer_id":31414362079289,"sku":"NB-TC-CBL-15FT","price":156.95,"currency_code":"USD","in_stock":true},{"title":"20 ft","offer_id":36377358827672,"sku":"NB-TC-CBL-20FT","price":168.95,"currency_code":"USD","in_stock":true},{"title":"25 ft","offer_id":36377377177752,"sku":"NB-TC-CBL-25FT","price":180.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/DSC00579j.jpg?v=1632760706"},{"product_id":"thermocouple-k-type-data-logger","title":"4-Channel K-Type Thermocouple Data Logger, SD Card, No Software","description":"\u003cp\u003eA four channel K-type thermocouple data logger that writes straight to an SD card, so a whole run is recorded with no software and no computer attached. $280.00 for the logger, $312.00 with the flex mount.\u003c\/p\u003e\n\u003cp\u003eFour readings on one screen is the point of it. Column, collection, recovery and solvent tank, logged together on one time base, which is how you actually see what a run did.\u003c\/p\u003e\n\u003ch3\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour K-type inputs, all four displayed at once on a 104 x 47 mm backlit LCD with a real-time clock\u003c\/li\u003e\n\u003cli\u003eLogs to an SD card with no software required and no fixed record limit. An 8 GB card is in the box\u003c\/li\u003e\n\u003cli\u003eSampling rate programmable from 1 second up\u003c\/li\u003e\n\u003cli\u003eProgrammable high and low temperature alarm limits, with a beeper and an LED\u003c\/li\u003e\n\u003cli\u003eHold, max and min from power on, one-button T1 minus T2, and a temperature offset for trimming a probe\u003c\/li\u003e\n\u003cli\u003eHandheld or wall mounted. Runs on 4 AA batteries, included, or a 9V adaptor, not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe logger\u003c\/li\u003e\n\u003cli\u003eTwo K-type thermocouple wires. They come from the maker in the set and they ship to you with the logger, we do not pull them out\u003c\/li\u003e\n\u003cli\u003eOne 8 GB SD card\u003c\/li\u003e\n\u003cli\u003e4 AA batteries and the operation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThose two K-type items are wires, not probes. They are bare wire thermocouples for reading air, surface or line temperature, and they are not the 1\/4 inch stainless thermocouple probes we build into vessels. If you need a stainless probe in a process port, that is a separate part on our thermocouple probe page.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cp\u003eEvery figure below is from 3P Certz engineering report ECR-210006-R1, where this logger is qualified as an electrical component.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4, K-type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring range\u003c\/td\u003e\n\u003ctd\u003e-200 to 1370 °C (-328 to 2498 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e0.1 °C, 0.1 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±(0.3% of reading + 1 °C), at 18 to 28 °C (64 to 82 °F) ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling rate\u003c\/td\u003e\n\u003ctd\u003eProgrammable from 1 second up\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory\u003c\/td\u003e\n\u003ctd\u003eSD card, no software, no fixed limit. 8 GB card included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermocouples included\u003c\/td\u003e\n\u003ctd\u003eTwo K-type thermocouple wires, in the box, shipped to you\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating environment\u003c\/td\u003e\n\u003ctd\u003e0 to 50 °C (32 to 122 °F), relative humidity under 80%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage\u003c\/td\u003e\n\u003ctd\u003e-20 to 50 °C (-4 to 122 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e4 x AA batteries, included. 9V adaptor not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize and weight\u003c\/td\u003e\n\u003ctd\u003e152 x 100 x 39 mm, about 300 g (0.66 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eCE. No C1D1 listing and no intrinsic safety listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhere it is allowed to sit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis logger has no C1D1 listing, so it does not belong inside the classified zone.\u003c\/strong\u003e An extraction room running propane, butane or isobutane is a Class I Division 1 space, and electrical equipment inside it is expected to be listed or labelled for C1D1 by a qualified testing laboratory\u003c\/li\u003e\n\u003cli\u003eOur certifier, 3P Certz, has determined that on our systems this logger may stay in the booth as long as it is at least 12 feet from the machine, because the device sits only marginally over the intrinsic safety energy limit. Twelve feet is the floor, not a target\u003c\/li\u003e\n\u003cli\u003eIf your room will not give you 12 feet, the logger goes outside the wall instead. Confirm either arrangement with whoever certifies your own room before you rely on it\u003c\/li\u003e\n\u003cli\u003eIf you genuinely cannot get the logger out of the zone, the answer is an intrinsically safe instrument instead of this one. A single input and a dual input intrinsically safe thermocouple thermometer, certified Ex ia IIB T4 Ga, Class I Division 1 Groups C and D, UL and ATEX, is qualified on our systems in the same report. It costs several times what this does. Ask us and we will point you at it\u003c\/li\u003e\n\u003cli\u003eNote the operating range as well: 0 to 50 °C (32 to 122 °F). The logger itself is not a cold-room instrument even though its probes read to -200 °C (-328 °F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe inputs take mini-K. Our 1\/4 inch K-type thermocouple probes end in a standard size male K plug, so a K to mini-K extension cable goes between the probe and this logger. That cable is the adapter, not an accessory\u003c\/li\u003e\n\u003cli\u003eSize the cable for the distance the logger has to keep, not for the bench. Our shortest listed cable is 6 feet and that does not cover 12 feet, so most runs need 15 feet or more\u003c\/li\u003e\n\u003cli\u003eFour channels means four thermocouples, and most systems have more temperature points than that. Pick the four that matter for the run you are logging\u003c\/li\u003e\n\u003cli\u003eThe two K-type wires in the box are included in the price. They do not replace a 1\/4 inch stainless probe, and buying this logger does not get you two of those\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsually ships the same day. Bought in and shipped from Bend, Oregon. This is a purchased instrument, not something we fabricate. More on how these systems are certified in \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003eCertifications and Compliance\u003c\/a\u003e.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"Included","offer_id":31414373285945,"sku":"Thermo-Logger-4Port-1","price":312.0,"currency_code":"USD","in_stock":true},{"title":"Not included","offer_id":31414373318713,"sku":"Thermo-Logger-4Port-2","price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/datalogger2.jpg?v=1632760387"},{"product_id":"hydrocarbon-solvent-tanks","title":"Hydrocarbon Solvent Tanks, 50, 75 and 100 LB, ASME and Non-ASME","description":"\u003cp\u003eJacketed hydrocarbon solvent tanks built in Bend, Oregon, in three sizes. \u003cstrong\u003e100 LB ASME code stamped, $28,750. 75 LB non-ASME, $18,750. 50 LB non-ASME, $17,550.\u003c\/strong\u003e All three are 250 psi (17.2 bar) MAWP with a cooling jacket carrying a 100 psi (6.9 bar) cryogenic relief valve, a 22 psi (1.5 bar) cryogenic relief on the jacket inlet and a 1\/2 in cryogenic needle valve, an electropolished interior and a 180 grit electropolished exterior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy the 75 or the 100.\u003c\/strong\u003e The 50 LB is on the list because people ask for it, but it is only $1,200 cheaper than the 75 and holds a third less solvent. Shops that buy the 50 almost always come back wanting the bigger one, and a second tank costs a great deal more than the $1,200 they saved.\u003c\/p\u003e\n\u003cp\u003eTwo 75 LB tanks are built and on the floor right now. If your jurisdiction, insurer or inspector asks for a code stamped pressure vessel, the 100 LB is the one to buy.\u003c\/p\u003e\n\n\u003ch3\u003eWHICH SIZE\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50 LB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e75 LB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100 LB\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$17,550\u003c\/td\u003e\n\u003ctd\u003e$18,750\u003c\/td\u003e\n\u003ctd\u003e$28,750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASME code stamp\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes, U stamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtra cost over the 50\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e$1,200 for 50 percent more solvent\u003c\/td\u003e\n\u003ctd\u003e$11,200, and it carries the stamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eBuilt to order\u003c\/td\u003e\n\u003ctd\u003eTwo in stock now\u003c\/td\u003e\n\u003ctd\u003eBuilt to order, 20 weeks maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur recommendation\u003c\/td\u003e\n\u003ctd\u003eOnly if you are certain 50 lb is enough\u003c\/td\u003e\n\u003ctd\u003eThe value buy\u003c\/td\u003e\n\u003ctd\u003eBuy this if anyone asks for a code stamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. The 100 LB tank is welded, hydro tested and stamped in our own shop.\u003c\/li\u003e\n\u003cli\u003e100 LB design calculations are 3P Certz report DCR-200101-R1, released 13 January 2021, to ASME BPVC Section VIII Division 1, 2019 edition. Registered in Canada as CRN R8694.5.\u003c\/li\u003e\n\u003cli\u003eThe 75 LB traces to 3P Certz report ECR-180053-R0, released 21 December 2018, covering the 60 to 75 lb solvent tank.\u003c\/li\u003e\n\u003cli\u003eZero corrosion allowance, joint efficiency 0.6, welded with SFA 5.9 \/ ER308L filler, passivated after pressure test.\u003c\/li\u003e\n\u003cli\u003eNon-stainless parts, meaning gaskets and seals, are purchased and are not represented as ours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cp\u003ePressure and temperature figures are taken from the design and certification reports, not from a brochure.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e100 LB, ASME\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e75 LB, non-ASME\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e50 LB, non-ASME\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$28,750\u003c\/td\u003e\n\u003ctd\u003e$18,750\u003c\/td\u003e\n\u003ctd\u003e$17,550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eNB-HC-SOL100\u003c\/td\u003e\n\u003ctd\u003eNB-HC-SOL75\u003c\/td\u003e\n\u003ctd\u003eNB-HC-SOL50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASME code stamp\u003c\/td\u003e\n\u003ctd\u003eYes, Section VIII Division 1, 2019 edition\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar) at 200 F (93 C)\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMDMT\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C) at 250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C)\u003c\/td\u003e\n\u003ctd\u003e-155 F (-104 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrostatic test, vessel\u003c\/td\u003e\n\u003ctd\u003e325 psi (22.4 bar) at 70 F (21 C)\u003c\/td\u003e\n\u003ctd\u003eNot applicable, no code stamp\u003c\/td\u003e\n\u003ctd\u003eNot applicable, no code stamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket MAWP\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar) at 200 F (93 C)\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar) relief valve fitted\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar) relief valve fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrostatic test, jacket\u003c\/td\u003e\n\u003ctd\u003e130 psi (9.0 bar) at 70 F (21 C)\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003ctd\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket connections\u003c\/td\u003e\n\u003ctd\u003e1-1\/2 in tri clamp in and out\u003c\/td\u003e\n\u003ctd\u003e1\/2 in compression in and out, push-on hose outlet\u003c\/td\u003e\n\u003ctd\u003e1\/2 in compression in and out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket protection\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar) cryogenic relief on the jacket, 22 psi (1.5 bar) on the inlet, 1\/2 in cryogenic needle valve\u003c\/td\u003e\n\u003ctd\u003eSame\u003c\/td\u003e\n\u003ctd\u003eSame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2 or process chiller\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2 or process chiller\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2 or process chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShell material\u003c\/td\u003e\n\u003ctd\u003eSA-312\/304L stainless\u003c\/td\u003e\n\u003ctd\u003e304L stainless\u003c\/td\u003e\n\u003ctd\u003e304L stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead material\u003c\/td\u003e\n\u003ctd\u003eSA-403\/304L stainless, ellipsoidal\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket shell material\u003c\/td\u003e\n\u003ctd\u003eSA-240\/304L stainless, SA-240\/304 closure member\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeld filler\u003c\/td\u003e\n\u003ctd\u003eSFA 5.9 \/ ER308L\u003c\/td\u003e\n\u003ctd\u003eSFA 5.9 \/ ER308L\u003c\/td\u003e\n\u003ctd\u003eSFA 5.9 \/ ER308L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterior finish\u003c\/td\u003e\n\u003ctd\u003eMill finish, electropolished\u003c\/td\u003e\n\u003ctd\u003eMill finish, electropolished\u003c\/td\u003e\n\u003ctd\u003eMill finish, electropolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExterior finish\u003c\/td\u003e\n\u003ctd\u003e180 grit, electropolished\u003c\/td\u003e\n\u003ctd\u003e180 grit, electropolished\u003c\/td\u003e\n\u003ctd\u003e180 grit, electropolished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign report\u003c\/td\u003e\n\u003ctd\u003e3P Certz DCR-200101-R1\u003c\/td\u003e\n\u003ctd\u003e3P Certz ECR-180053-R0\u003c\/td\u003e\n\u003ctd\u003eNot published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCanada, CRN\u003c\/td\u003e\n\u003ctd\u003eR8694.5\u003c\/td\u003e\n\u003ctd\u003eNot registered\u003c\/td\u003e\n\u003ctd\u003eNot registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate\u003c\/td\u003e\n\u003ctd\u003e80 in long x 16 in wide x 22 in tall\u003c\/td\u003e\n\u003ctd\u003e80 in long x 16 in wide x 22 in tall\u003c\/td\u003e\n\u003ctd\u003e80 in long x 16 in wide x 22 in tall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e600 lb, LTL freight\u003c\/td\u003e\n\u003ctd\u003e600 lb, LTL freight\u003c\/td\u003e\n\u003ctd\u003e600 lb, LTL freight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eBuilt to order, 20 weeks maximum\u003c\/td\u003e\n\u003ctd\u003eTwo built and in stock\u003c\/td\u003e\n\u003ctd\u003eBuilt to order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOne crate figure covers all three sizes. It is the crate a solvent tank ships in on its own, not a measurement taken separately per size.\u003c\/p\u003e\n\u003cp\u003eTop caps are built to the port arrangement your system uses and are quoted by email rather than sold from this page. Same for custom fittings, jackets and dimensions.\u003c\/p\u003e\n\n\u003ch3\u003eFITS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 100 LB is the tank fitted to the \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB system\u003c\/a\u003e, and the \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Double Barrel\u003c\/a\u003e runs two of them.\u003c\/li\u003e\n\u003cli\u003eBuy any size as a second tank so one is filling while the other runs, or to replace a legacy 50 lb or 200 lb tank.\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/secondary-material-vessel-rack\"\u003ematerial column rack\u003c\/a\u003e can be ordered with a 100 LB ASME tank already on it.\u003c\/li\u003e\n\u003cli\u003eButane, propane and blends. Not for ethanol service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLEAD TIME AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSolvent tanks are usually in stock. If yours has to be built, 20 weeks is the maximum.\u003c\/li\u003e\n\u003cli\u003ePaid in full before it ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight, in a crate 80 in long x 16 in wide x 22 in tall weighing 600 lb, the same figure for all three sizes. Freight is quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCONSUMABLES\u003c\/h3\u003e\n\u003cp\u003eThe high flow \u003ca href=\"\/products\/conrader-srv530-asme-high-flow-relief-valve\"\u003eConrader SRV530\u003c\/a\u003e goes on the top of the solvent tank and nowhere else on the system, because in an emergency the largest volume has to dump pressure fastest. The jacket reliefs are \u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003ecryogenic PRVs\u003c\/a\u003e at 100 psi (6.9 bar) on the jacket and 22 psi (1.5 bar) on the inlet, on a 3 to 6 month replacement schedule. Gaskets are \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton\u003c\/a\u003e, also 3 to 6 months. A \u003ca href=\"\/products\/solvent-tank-condenser\"\u003esolvent tank condenser\u003c\/a\u003e speeds recovery back into the tank.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"75 LB (Non-ASME)","offer_id":34836969717912,"sku":"NB-HC-SOL75","price":18750.0,"currency_code":"USD","in_stock":true},{"title":"100 LB","offer_id":34836969783448,"sku":"NB-HC-SOL100","price":28750.0,"currency_code":"USD","in_stock":true},{"title":"50 LB (Non-ASME)","offer_id":67781034901703,"sku":"NB-HC-SOL50","price":17550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/SolventTank14_Beauty.png?v=1656528542"},{"product_id":"decarb-system","title":"Decarb \/ Isolation Reactor System, Custom Fabrication","description":"\u003cp\u003e\u003cstrong\u003eThis one is built to your specification.\u003c\/strong\u003e We do not stock a decarb system and sell it out of a box. You tell us the batch size, the temperature and pressure you need to hit, how you want it heated and chilled, whether you want a mixer and what your controls look like, and we build that machine.\u003c\/p\u003e\n\u003cp\u003eSame machine, two names. Shops running decarboxylation call it a decarb system or a decarb reactor. Shops holding and isolating a fraction call it an isolation reactor or an isolation vessel. It is a jacketed stainless reactor either way, and we build it for decarb and\/or isolation.\u003c\/p\u003e\n\u003cp\u003eThe two configurations priced on this page are reference builds, not the whole offer. They exist so you have a real number to start from: \u003cstrong\u003e$31,000\u003c\/strong\u003e without a mixer and \u003cstrong\u003e$42,500\u003c\/strong\u003e with the C1D1 rated pneumatic mixer. Most orders move away from those in one direction or another.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck out our newest designs.\u003c\/strong\u003e These get revised as we build them, so the newest one out of the shop is not always the one in the photographs here. Call 541-330-6409 or email nate@nboler.com and we will send pictures of the most recent builds before you spec yours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStart the conversation: 541-330-6409, or nate@nboler.com.\u003c\/strong\u003e Bring your target batch volume and what your crude behaves like. That is usually a ten minute call and it saves a lot of guessing.\u003c\/p\u003e\n\n\u003ch3\u003eWHAT WE CHANGE PER BUILD\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel size\u003c\/td\u003e\n\u003ctd\u003eLarger or smaller batch volumes than the reference build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure rating\u003c\/td\u003e\n\u003ctd\u003eHigher than the 100 psi (6.9 bar) reference, if your process needs it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003eWider than the reference -60 C to 140 C (-76 F to 284 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixer\u003c\/td\u003e\n\u003ctd\u003eC1D1 rated pneumatic fitted, or a 6 in sanitary tri clamp top left open for a mixer you already own\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003eJacket sized to the hot water unit you run\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondenser\u003c\/td\u003e\n\u003ctd\u003eSized for your chiller or for liquid CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransfer\u003c\/td\u003e\n\u003ctd\u003eJacketed and heated transfer tube, for crude too thick to pour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePorts and fittings\u003c\/td\u003e\n\u003ctd\u003eArranged to suit your existing plumbing and controls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eASME CODE STAMPED VERSION, A NAMED OPTION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEither configuration can be built as an ASME code stamped vessel instead. Ask for it at the start and we quote it that way.\u003c\/li\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp and welds, hydro tests and stamps pressure vessels in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eA code stamped build carries the design report prepared by a licensed PE, and Canadian CRN registration where the install needs it.\u003c\/li\u003e\n\u003cli\u003eThe two prices above are the non-stamped reference builds. The coded version is quoted, because what it costs depends on the design pressure, the vessel size and whether you need CRN.\u003c\/li\u003e\n\u003cli\u003eIf your jurisdiction, your AHJ or your insurer has asked for a stamp, say so before the build starts rather than after.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTHE REFERENCE BUILD\u003c\/h3\u003e\n\u003cp\u003eVerified specification of the two configurations priced above, so you have something concrete to measure your own requirement against.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice, without mixer\u003c\/td\u003e\n\u003ctd\u003e$31,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice, with C1D1 mixer\u003c\/td\u003e\n\u003ctd\u003e$42,500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure rating\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-60 C to 140 C (-76 F to 284 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBatch volume\u003c\/td\u003e\n\u003ctd\u003eUp to 60 gallons, at 50 percent headspace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixer, when fitted\u003c\/td\u003e\n\u003ctd\u003eC1D1 rated pneumatic, seals rated to 125 psi (8.6 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixer connection, when not fitted\u003c\/td\u003e\n\u003ctd\u003e6 in sanitary tri clamp, for a customer supplied mixer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondenser cooling\u003c\/td\u003e\n\u003ctd\u003eProcess chiller or liquid CO2, supplied separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel heating\u003c\/td\u003e\n\u003ctd\u003eHot water, from a temperature control unit supplied separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eASME code stamp\u003c\/td\u003e\n\u003ctd\u003eNot on the reference build, which is rated to 100 psi (6.9 bar) and carries no stamp. A code stamped version is offered and quoted separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate\u003c\/td\u003e\n\u003ctd\u003e48 in wide x 60 in long x 80 in tall, both configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e350 lb, LTL freight, both configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabrication\u003c\/td\u003e\n\u003ctd\u003eBend, Oregon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe C1D1 mixer version ships in the same crate as the version without it. Chiller, hot water unit and vacuum controller are not included in either configuration.\u003c\/p\u003e\n\n\u003ch3\u003eWHAT ELSE WE FABRICATE TO ORDER\u003c\/h3\u003e\n\u003cp\u003eThis is the page where it is worth saying out loud: custom stainless is the core of the business, not a sideline. N.B. Oler holds the ASME U stamp and welds pressure vessels in house in Bend, Oregon.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eASME code stamped pressure vessels, with the design report prepared by a licensed PE and Canadian CRN registration where you need it.\u003c\/li\u003e\n\u003cli\u003eJacketed vessels and columns, chilled or heated, in the sizes your process needs rather than the sizes a catalogue offers.\u003c\/li\u003e\n\u003cli\u003eTube in shell condensers, sight spools, custom top caps and port arrangements.\u003c\/li\u003e\n\u003cli\u003eRacks and skids built around equipment you already own.\u003c\/li\u003e\n\u003cli\u003eIf it is stainless and it holds pressure, ask. If we would not build it well, we will tell you that instead of quoting it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf your requirement is cannabinoid crystallisation rather than decarboxylation, the \u003ca href=\"\/products\/diamond-mine\"\u003eDiamond Mine\u003c\/a\u003e is the purpose built vessel for that.\u003c\/p\u003e\n\n\u003ch3\u003eLEAD TIME AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEvery one of these is made to order, so the lead time depends on the build. Call 541-330-6409 and we will give you a real date rather than a stock figure.\u003c\/li\u003e\n\u003cli\u003ePaid in full before it ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight, in a crate 48 in wide x 60 in long x 80 in tall weighing 350 lb, the same for both configurations. Freight is quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003cli\u003eCustom builds are not returnable, which is the other reason the phone call comes first.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"N.B.Oler","offers":[{"title":"With C1D1 Mixer","offer_id":34837361492120,"sku":"NB-DEC-SYS-MIX","price":42500.0,"currency_code":"USD","in_stock":true},{"title":"Without C1D1 Mixer","offer_id":34837361524888,"sku":"NB-DEC-SYS-NOMIX","price":31000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Decarb.jpg?v=1592585982"},{"product_id":"secondary-material-vessel-rack","title":"Material Column Rack (Secondary Material Vessel Rack)","description":"\u003cp\u003eStand-alone stainless rack that adds material column positions to a closed loop hydrocarbon system, so you soak one set of columns while the other set drains. \u003cstrong\u003e2x $19,000. 4x $33,000. 6x $45,000.\u003c\/strong\u003e Each configuration is also sold with a 100 LB ASME solvent tank already mounted on it.\u003c\/p\u003e\n\u003cp\u003eThe rack can stand on its own or be bolted to the main extraction skid for stability. Sized for 10 lb material columns, which are the 6 in x 48 in jacketed columns used on N.B. Oler systems.\u003c\/p\u003e\n\n\u003ch3\u003ePRICING\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRack only\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWith 100 LB ASME solvent tank\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2x 10 LB material columns\u003c\/td\u003e\n\u003ctd\u003eNB-HC-MC-RACK-2\u003c\/td\u003e\n\u003ctd\u003e$19,000\u003c\/td\u003e\n\u003ctd\u003e$47,750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4x 10 LB material columns\u003c\/td\u003e\n\u003ctd\u003eNB-HC-MC-RACK-4\u003c\/td\u003e\n\u003ctd\u003e$33,000\u003c\/td\u003e\n\u003ctd\u003e$61,750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6x 10 LB material columns\u003c\/td\u003e\n\u003ctd\u003eNB-HC-MC-RACK-6\u003c\/td\u003e\n\u003ctd\u003e$45,000\u003c\/td\u003e\n\u003ctd\u003e$73,750\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe solvent tank versions carry the \u003ccode\u003e-SOL\u003c\/code\u003e suffix and add exactly $28,750 to the rack price, which is the list price of the \u003ca href=\"\/products\/hydrocarbon-solvent-tanks\"\u003e100 LB ASME solvent tank\u003c\/a\u003e bought on its own. There is no bundle discount and no hidden markup: it is the rack price plus the tank price. Order the tank with the rack and it arrives mounted, plumbed to the rack and tested as one assembly rather than as two crates you have to marry up on site. The 100 LB tank ships in the rack crate, so a \u003ccode\u003e-SOL\u003c\/code\u003e order arrives as one crate, not two.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabricated in Bend, Oregon. All stainless on the rack is welded here.\u003c\/li\u003e\n\u003cli\u003eThe 100 LB solvent tank option is an ASME Section VIII Division 1 vessel with the U stamp, design report DCR-200101-R1, registered in Canada as CRN R8694.5.\u003c\/li\u003e\n\u003cli\u003eThe rack is welded to the same drawings as the columns it carries, so a 6 in x 48 in jacketed column off an N.B. Oler system drops straight in without adapters or re-plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFITS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB\u003c\/a\u003e and \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Double Barrel\u003c\/a\u003e systems.\u003c\/li\u003e\n\u003cli\u003eHolds 10 lb material columns, meaning 6 in x 48 in jacketed columns with a 7 in jacket.\u003c\/li\u003e\n\u003cli\u003eBolts to the main skid or stands alone on its own feet.\u003c\/li\u003e\n\u003cli\u003eButane, propane and blends. Not an ethanol product.\u003c\/li\u003e\n\u003cli\u003eIf you run a system built by someone else, call 541-330-6409 with your column dimensions and manifold sizes before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLEAD TIME AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to order. Call 541-330-6409 for the current lead time on the configuration you want.\u003c\/li\u003e\n\u003cli\u003ePaid in full before it ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight, in a crate 48 in wide x 60 in long x 80 in tall weighing 2,000 lb. The 100 LB solvent tank option ships in that same crate. Freight is quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCONSUMABLES\u003c\/h3\u003e\n\u003cp\u003eEvery added column position adds consumables on the same schedule as the rest of the system: \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton gaskets\u003c\/a\u003e every 3 to 6 months, \u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003ecryogenic PRVs\u003c\/a\u003e every 3 to 6 months, \u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamps\u003c\/a\u003e every 6 months with their \u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eM12 bolt kits\u003c\/a\u003e, and \u003ca href=\"\/products\/6-inch-filter-sock\"\u003e6 in filter socks\u003c\/a\u003e and \u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003esintered filters\u003c\/a\u003e per column.\u003c\/p\u003e\n","brand":"N.B.Oler","offers":[{"title":"2x - 10 LB Material Vessel \/ With 100 LB ASME Solvent Tank","offer_id":34837802516632,"sku":"NB-HC-MC-RACK-2-SOL","price":47750.0,"currency_code":"USD","in_stock":true},{"title":"2x - 10 LB Material Vessel \/ Without Solvent Tank","offer_id":34837802549400,"sku":"NB-HC-MC-RACK-2","price":19000.0,"currency_code":"USD","in_stock":true},{"title":"4x - 10 LB Material Vessel \/ With 100 LB ASME Solvent Tank","offer_id":34837802582168,"sku":"NB-HC-MC-RACK-4-SOL","price":61750.0,"currency_code":"USD","in_stock":true},{"title":"4x - 10 LB Material Vessel \/ Without Solvent Tank","offer_id":34837802614936,"sku":"NB-HC-MC-RACK-4","price":33000.0,"currency_code":"USD","in_stock":true},{"title":"6x - 10 LB Material Vessel \/ With 100 LB ASME Solvent Tank","offer_id":34837802647704,"sku":"NB-HC-MC-RACK-6-SOL","price":73750.0,"currency_code":"USD","in_stock":true},{"title":"6x - 10 LB Material Vessel \/ Without Solvent Tank","offer_id":34837802680472,"sku":"NB-HC-MC-RACK-6","price":45000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/2x4x6x.png?v=1593468847"},{"product_id":"40-lb-passive-hydrocarbon-extraction-system","title":"40 LB Closed Loop Extractor, Passive, Single Barrel Compact","description":"\u003cp\u003e40 LB passive closed loop hydrocarbon extractor, single barrel compact, \u003cstrong\u003e$367,500\u003c\/strong\u003e. Four 6 in x 48 in material columns feeding one large ASME recovery vessel and one large ASME solvent tank. 18,000 g, about 39.6 lb, of material per run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRead this before you buy it: for most operations the \u003ca href=\"\/products\/40-lb-passive-double-barrel-hydrocarbon-extraction-system\"\u003e40 LB Passive Double Barrel\u003c\/a\u003e is the better machine and it costs less, $350,000 against $367,500.\u003c\/strong\u003e It gives you twice the vessels, redundancy on every one of them, and it is the design in current production. This page exists for the one situation the Double Barrel cannot solve: a room that physically will not take it.\u003c\/p\u003e\n\u003cp\u003eThat is what this machine is for. It runs the same 40 LB of throughput in a 52 in x 64 in floor space, and it ships as three crates so the rack can be walked through a 32.5 in man door. If you have the throughput requirement but not the room, this is the layout that fits. If you have the room, buy the Double Barrel.\u003c\/p\u003e\n\n\u003ch3\u003eTHIS ONE OR THE DOUBLE BARREL\u003c\/h3\u003e\n\u003cp\u003eWe build two machines at 40 LB and they are not interchangeable.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThis machine, single barrel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDouble Barrel\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$367,500\u003c\/td\u003e\n\u003ctd\u003e$350,000, and it is the cheaper machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLayout\u003c\/td\u003e\n\u003ctd\u003eOne barrel, four columns onto one recovery vessel\u003c\/td\u003e\n\u003ctd\u003eTwo complete 20 LB sides on one rack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent vessels\u003c\/td\u003e\n\u003ctd\u003eOne large ASME tank\u003c\/td\u003e\n\u003ctd\u003eTwo 100 lb ASME tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery vessels\u003c\/td\u003e\n\u003ctd\u003eOne large ASME vessel, 26 in jacket, hot water heated\u003c\/td\u003e\n\u003ctd\u003eTwo 12 in ASME vessels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve\u003c\/td\u003e\n\u003ctd\u003eOne, 6 in x 48 in\u003c\/td\u003e\n\u003ctd\u003eTwo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundancy\u003c\/td\u003e\n\u003ctd\u003eNone. One vessel down stops the machine\u003c\/td\u003e\n\u003ctd\u003eEvery vessel doubled. One side runs while the other is down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFloor space\u003c\/td\u003e\n\u003ctd\u003e52 in x 64 in\u003c\/td\u003e\n\u003ctd\u003e100 in x 44 in x 87 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHow it arrives\u003c\/td\u003e\n\u003ctd\u003eThree crates, 4,200 lb total, largest is 48 x 60 x 90 in\u003c\/td\u003e\n\u003ctd\u003eOne crate, 3,000 lb, 144 x 48 x 90 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGets into a tight room\u003c\/td\u003e\n\u003ctd\u003eYes, three pieces through a 32.5 in door\u003c\/td\u003e\n\u003ctd\u003eSeparates into two sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial per run\u003c\/td\u003e\n\u003ctd\u003e18,000 g, 39.6 lb\u003c\/td\u003e\n\u003ctd\u003e18,000 g, 39.6 lb, or about 72 lb live resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus\u003c\/td\u003e\n\u003ctd\u003eBuilt to order\u003c\/td\u003e\n\u003ctd\u003eCurrent production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOur recommendation\u003c\/td\u003e\n\u003ctd\u003eOnly if your room rules out the Double Barrel\u003c\/td\u003e\n\u003ctd\u003eBuy this one\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWe would rather sell you the Double Barrel. It is less money, it has twice the equipment, and when a gasket goes you keep producing on the other side instead of shutting down. The only honest reason to choose the compact is floor space. Call 541-330-6409 with your room dimensions and door width and we will tell you straight which one you can actually fit.\u003c\/p\u003e\n\n\u003ch3\u003eHOW IT GETS INTO YOUR BUILDING\u003c\/h3\u003e\n\u003cp\u003eThis is the part that decides whether the machine can be installed at all, so here are the real numbers rather than a promise.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide one\u003c\/td\u003e\n\u003ctd\u003e48 x 48 x 72 in\u003c\/td\u003e\n\u003ctd\u003e1,500 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide two\u003c\/td\u003e\n\u003ctd\u003e48 x 48 x 72 in\u003c\/td\u003e\n\u003ctd\u003e1,500 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThird section\u003c\/td\u003e\n\u003ctd\u003e48 in wide x 60 in long x 90 in tall\u003c\/td\u003e\n\u003ctd\u003e1,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal\u003c\/td\u003e\n\u003ctd\u003eThree crates\u003c\/td\u003e\n\u003ctd\u003e4,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe Double Barrel arrives as a single 144 in crate. This one arrives in three, which is exactly why it can go into a building the Double Barrel cannot. Once uncrated, the three rack sections pass through a 32.5 in man door and bolt together on site into a 52 in x 64 in footprint.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. The solvent and recovery vessels are welded, hydro tested and stamped in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eThe material columns and the molecular sieve are not U stamped and do not need to be. Their inside diameters fall under the ASME BPVC Section VIII Division 1 exemption for vessels of 6 in inside diameter or less, U-1(2)(-i). They are built to the same shop standard and are analyzed in the report alongside the stamped vessels.\u003c\/li\u003e\n\u003cli\u003eAll stainless is fabricated here. Gaskets, filter cartridges and filter socks are purchased parts and are not represented as ours.\u003c\/li\u003e\n\u003cli\u003eCertified under 3P Certz report ECR-200023-R0, released 24 August 2020, with a third party P.E. report on file for engineering review and permitting.\u003c\/li\u003e\n\u003cli\u003eSwagelok and Superlok fittings throughout, with traceable material certifications on the pressure parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$367,500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity per run\u003c\/td\u003e\n\u003ctd\u003e18,000 g, about 39.6 lb, of material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial columns\u003c\/td\u003e\n\u003ctd\u003eFour, 6 in x 48 in with a 7 in jacket, bowl reducer and cap with fittings and hoses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColumn chilling\u003c\/td\u003e\n\u003ctd\u003eLiquid CO2 chilled, or vacuum jacketed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColumn filtration\u003c\/td\u003e\n\u003ctd\u003e50 and 20 micron stainless sintered filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery vessel\u003c\/td\u003e\n\u003ctd\u003eOne, with a 26 in jacket, cap with fittings and hoses, hot water heated. ASME certified and U stamped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tank\u003c\/td\u003e\n\u003ctd\u003eOne, liquid CO2 or chiller cooled, chiller recommended. ASME certified and U stamped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertified maximum solvent capacity\u003c\/td\u003e\n\u003ctd\u003e290 lb, per ECR-200023-R0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve\u003c\/td\u003e\n\u003ctd\u003e6 in x 48 in, with cap, fittings and hoses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMAWP, process vessels\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar), with 250 psi relief valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColumn jackets\u003c\/td\u003e\n\u003ctd\u003e22 psi (1.5 bar), with 22 psi relief valves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManifolds\u003c\/td\u003e\n\u003ctd\u003eSolvent in, vacuum and nitrogen, all Swagelok or Superlok fittings and hoses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVacuum pump\u003c\/td\u003e\n\u003ctd\u003eIncluded. Pulls to -29.5 inHg (-14.5 psi, -1.0 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNitrogen\u003c\/td\u003e\n\u003ctd\u003eN2 regulator included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack\u003c\/td\u003e\n\u003ctd\u003eThree piece detachable, fits through a 32.5 in doorway\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembled floor space\u003c\/td\u003e\n\u003ctd\u003e52 in x 64 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated weight\u003c\/td\u003e\n\u003ctd\u003e4,200 lb total, across three crates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrates\u003c\/td\u003e\n\u003ctd\u003eTwo at 48 x 48 x 72 in and 1,500 lb each, one at 48 x 60 x 90 in and 1,200 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery\u003c\/td\u003e\n\u003ctd\u003eFully passive, no solvent pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eASME Section VIII Division 1, U stamp. 3P Certz ECR-200023-R0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAncillary heating and chilling equipment is needed but not provided. Liquid CO2 or chiller installation is done by your local gas supplier. A color remediation column is an option on this system rather than standard equipment, so say if you want one.\u003c\/p\u003e\n\u003cp\u003eMaterial, recovery and solvent tank sizes can be changed and upgraded. Custom configurations are quoted by phone.\u003c\/p\u003e\n\n\u003ch3\u003eLEAD TIME AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt to order. Call 541-330-6409 for the current lead time on this configuration.\u003c\/li\u003e\n\u003cli\u003ePaid in full before the system ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips LTL freight as three crates totalling 4,200 lb. Freight is quoted and invoiced after the crates are measured, not charged at checkout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWHAT SHIPS WITH IT\u003c\/h3\u003e\n\u003cp\u003eOnsite training and commissioning are part of the delivery, not optional paperwork.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShips with the machine\u003c\/td\u003e\n\u003ctd\u003eHydrocarbon Operators Manual, What To Expect guide, onsite training and commissioning checklist, safety and process training with certification exam and certificate of completion, operators run log\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished free on this site\u003c\/td\u003e\n\u003ctd\u003eSintered Filter Tech Specs and the six Tech Tuesday technical briefs, including \u003ca href=\"\/blogs\/tech\/what-crc-media-should-you-use\"\u003eCRC media\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/molecular-sieves\"\u003emolecular sieves\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/diamond-formation\"\u003ediamond formation\u003c\/a\u003e and \u003ca href=\"\/blogs\/tech\/storage-for-thc-cbd-cbn\"\u003ecannabinoid storage\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSERVICE SCHEDULE AND REORDER LIST\u003c\/h3\u003e\n\u003cp\u003eQuantities on this configuration differ from the published 20 LB and Double Barrel figures, so take them from the parts table in the Operators Manual that ships with the machine, or call the shop with your serial number. The parts themselves are stocked.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePart\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003eGaskets, \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton\u003c\/a\u003e or \u003ca href=\"\/products\/tri-clamp-buna-n-gasket\"\u003eBuna-N\u003c\/a\u003e, 6 in, 2 in and 1.5 in\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003eCryogenic PRVs\u003c\/a\u003e, 250 psi (17.2 bar) on the process vessels, 22 psi (1.5 bar) on the column jackets and liquid CO2 inlets, 100 psi (6.9 bar) on the solvent jacket\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus a spare of each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003eHigh flow \u003ca href=\"\/products\/conrader-srv530-asme-high-flow-relief-valve\"\u003eConrader SRV530\u003c\/a\u003e, on the solvent tank top and the recovery vessel top only\u003c\/td\u003e\n\u003ctd\u003e2, plus a spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamps\u003c\/a\u003e and brass \u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003etri clamp nuts\u003c\/a\u003e, regardless of condition\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eTri clamp bolts\u003c\/a\u003e and \u003ca href=\"\/products\/high-performance-ptfe-hose-with-compression-fitting-tube-adaptor\"\u003ePTFE hose adapter ends\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAll bolts, one hose end per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeekly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/molecular-sieve-beads-4a-pore-size\"\u003e4A molecular sieve beads\u003c\/a\u003e, 4x8 mesh\u003c\/td\u003e\n\u003ctd\u003eThis system runs a 6 in x 48 in sieve, so call the shop for the charge rather than scaling the 20 LB figure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperator choice\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/6-inch-filter-sock\"\u003e6 in filter socks\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 24 in or one 48 in per column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaned, not replaced\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003eSintered tri clamp filters\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e50 and 20 micron on the material columns, 10 micron either side of the sieve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eReplace gaskets on schedule regardless of appearance, and immediately on cracking, tearing, splitting or permanent deformation.\u003c\/li\u003e\n\u003cli\u003eTorque 30 in-lbs on elastomeric gaskets, 50 in-lbs on rigid.\u003c\/li\u003e\n\u003cli\u003ePick Viton or Buna-N and stay with it. We recommend Viton because it seals better.\u003c\/li\u003e\n\u003cli\u003eKeep a second set of sintered filters so one runs while the other is in the ultrasonic.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":35043644833944,"sku":"NB-HC-SYS-40LB-SB","price":367500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Murphy12_Beauty.png?v=1657153129"},{"product_id":"molecular-sieve-beads-4a-pore-size","title":"Molecular Sieve Beads 4A, Hydrocarbon Drying, 4x8 \u0026 8x12 Mesh","description":"\u003cp\u003e4A molecular sieve beads for drying butane, propane and other hydrocarbons. 100 lb drop shipped at $729.95 plus freight, 20 lb at $209.95 and 10 lb at $109.95 repacked in Bend, Oregon, and 8x12 mesh on clearance from $49.95.\u003c\/p\u003e\n\u003ch3\u003eSizes and price\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003cth\u003eMesh\u003c\/th\u003e\n\u003cth\u003ePrice\u003c\/th\u003e\n\u003cth\u003eHow it ships\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003ctd\u003e4x8\u003c\/td\u003e\n\u003ctd\u003e$729.95 plus freight\u003c\/td\u003e\n\u003ctd\u003eDrop shipped from the plant, 3 to 5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 lb\u003c\/td\u003e\n\u003ctd\u003e4x8\u003c\/td\u003e\n\u003ctd\u003e$209.95\u003c\/td\u003e\n\u003ctd\u003eRepacked in Bend, on reorder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 lb\u003c\/td\u003e\n\u003ctd\u003e4x8\u003c\/td\u003e\n\u003ctd\u003e$109.95\u003c\/td\u003e\n\u003ctd\u003eRepacked in Bend, on reorder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 lb\u003c\/td\u003e\n\u003ctd\u003e8x12\u003c\/td\u003e\n\u003ctd\u003e$49.95, clearance\u003c\/td\u003e\n\u003ctd\u003eIn stock in Bend, no more coming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 lb lot\u003c\/td\u003e\n\u003ctd\u003e8x12\u003c\/td\u003e\n\u003ctd\u003e$119.95, clearance\u003c\/td\u003e\n\u003ctd\u003eOne lot, in stock in Bend, no more coming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eFreight on the 100 lb is not in the $729.95. It is quoted per order at our actual freight cost plus 20 percent, to your address, before you pay. We do not type a figure from memory and we do not true it up on the invoice afterwards.\u003c\/li\u003e\n\u003cli\u003eThe 100 lb ships direct from the plant on a 3 to 5 day lead, so it costs less per pound and it gets there sooner. If you run a system, that is the one to order.\u003c\/li\u003e\n\u003cli\u003eThe 10 and 20 lb are repacked here and go out with the rest of your parts, usually the same day.\u003c\/li\u003e\n\u003cli\u003eThe 4x8 repacks are out of stock on the shelf right now and on reorder. The page stays open so you can order, and the shop will give you the lead time. Call 541-330-6409 or email info@nboler.com.\u003c\/li\u003e\n\u003cli\u003e4x8 is the larger bead and the one we stock and run on our own systems. Larger beads give lower pressure drop across the bed.\u003c\/li\u003e\n\u003cli\u003e8x12 is the smaller bead. More surface area per pound, more pressure drop across the bed. It is here on clearance, it is not reordered, and when it is gone it is gone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e4A for hydrocarbons, 3A for ethanol\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a hard rule, not a preference. Pores of 4 angstroms and larger adsorb the ethanol molecule itself, so 4A on an ethanol system wastes your beads and your solvent at the same time.\u003c\/li\u003e\n\u003cli\u003eDrying ethanol instead? Buy the \u003ca href=\"\/products\/molecular-sieve-beads-3a-pore-size\"\u003e3A beads\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e5A suits neither. A 5 angstrom pore adsorbs n-butane and propane themselves, so it would strip the solvent out of your stream along with the water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCharge, and when to change them\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 lb charges a 6 inch by 24 inch column, which is the sieve vessel on a 20 LB system.\u003c\/li\u003e\n\u003cli\u003eA 40 LB system runs a 6 inch by 48 inch vessel and takes more. Call rather than scaling it up, because we do not publish a figure we have not measured.\u003c\/li\u003e\n\u003cli\u003eChange them every week at minimum, and every two days when you are running wet material. Sieve life is set by the moisture in your starting material, not by the calendar.\u003c\/li\u003e\n\u003cli\u003eWater showing up in your extract is the symptom, and by the time you see it you are already past due.\u003c\/li\u003e\n\u003cli\u003eRun a 10 micron \u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003esintered disc\u003c\/a\u003e on both sides of the bed. Beads shed dust, and dust downstream of the dryer ends up in your product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRegeneration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeat under high vacuum between 125 C and 315 C (257 F and 599 F), or heat and purge with a carrier gas.\u003c\/li\u003e\n\u003cli\u003eDo not overshoot the top of that range. Excessive temperature decomposes the beads, and a decomposed bead does not come back.\u003c\/li\u003e\n\u003cli\u003eThat range is from the N.B. Oler Hydrocarbon Operators Manual, Rev. 2026.1, section 8, Consumables. Background on pore sizes is in \u003ca href=\"\/blogs\/tech\/molecular-sieves\"\u003eMolecular Sieves\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"N.B.Oler","offers":[{"title":"20 LB 4x8","offer_id":36502914498712,"sku":"MOL-4A-4x8-20","price":209.95,"currency_code":"USD","in_stock":true},{"title":"10 LB 4x8","offer_id":36502914531480,"sku":"MOL-4A-4x8-10","price":109.95,"currency_code":"USD","in_stock":true},{"title":"100 LB 4x8 Drop Ship","offer_id":67796170899655,"sku":"MOL-4A-4x8-100","price":729.95,"currency_code":"USD","in_stock":true},{"title":"10 LB 8x12","offer_id":67796170932423,"sku":"MOL-4A-8x12-10","price":49.95,"currency_code":"USD","in_stock":true},{"title":"30 LB 8x12 Lot","offer_id":67796170965191,"sku":"MOL-4A-8x12-LOT30","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/3A-4A-Molecular-Sieve_b2adb9e6-8620-42e8-87c1-66db97ed0f74.jpg?v=1600966139"},{"product_id":"40-lb-passive-double-barrel-hydrocarbon-extraction-system","title":"40 LB Passive Double Barrel Hydrocarbon Extractor, ASME Certified","description":"\u003cp\u003e40 LB passive double barrel hydrocarbon extraction system, \u003cstrong\u003e$350,000\u003c\/strong\u003e. Two complete 20 LB sides on one rack: four 6 in x 48 in chilled material columns, two 12 in ASME recovery vessels, two 100 lb ASME solvent tanks, two color remediation columns and two molecular sieves, tied together by a chilled recovery manifold.\u003c\/p\u003e\n\u003cp\u003eThe throughput comes from the layout. One pair of columns soaks while the other pair drains, so the recovery side is never idle waiting on a load. Recovery is fully passive, so there is no pump in the solvent path. Runs crude or live resin without reconfiguration.\u003c\/p\u003e\n\u003cp\u003eThe other advantage is redundancy. Every vessel on this machine is doubled, so one side keeps producing while the other is down for a gasket change or an inspection.\u003c\/p\u003e\n\n\u003ch3\u003eTHE MOST THOROUGHLY DOCUMENTED SYSTEM WE BUILD\u003c\/h3\u003e\n\u003cp\u003eThis is the machine 3P Certz reviewed in full, as 3P Certz report ECR-250902-R0, Revision 0, issued 23 October 2025. Engineer of record Brian Kester, PE, reviewed by Craig Beaver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery pressure vessel is analyzed individually, with its own summary and calculation pages, inside diameter, pressure envelope and U stamp determination.\u003c\/li\u003e\n\u003cli\u003eEvery purchased component on the system is listed by manufacturer, part or model number, and qualified against pressure, temperature and wetted materials. That covers the relief valves, ball valves, needle valves, the compound gauge, the sight glasses, the quick connects, the tubing and the gaskets.\u003c\/li\u003e\n\u003cli\u003eThe report states that components shall not be substituted outside the specifications in that list, which is why we do not swap parts on a certified build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are comparing quotes, ask the other vendor for the equivalent document. Ours exists, it is signed by a PE, and every number on this page traces back to it.\u003c\/p\u003e\n\n\u003ch3\u003eBUILT, NOT RESOLD\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN.B. Oler holds the ASME U stamp. The solvent vessels, the color remediation columns and the recovery vessels are welded, hydro tested and U stamped in our own shop in Bend, Oregon.\u003c\/li\u003e\n\u003cli\u003eThe material columns and molecular sieves are not U stamped and do not need to be. At 5.75 in and 5.72 in inside diameter they fall under the ASME BPVC Section VIII Division 1 exemption for vessels of 6 in inside diameter or less, U-1(2)(-i). They are built to the same shop standard and are analyzed in the report alongside the stamped vessels.\u003c\/li\u003e\n\u003cli\u003eSolvent vessel design calculations are DCR-200101-R1. Recovery vessel design calculations are DCR-210020.\u003c\/li\u003e\n\u003cli\u003eAll stainless is fabricated here. Gaskets, filter cartridges and filter socks are purchased parts and are not represented as ours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cp\u003eFigures below are from ECR-250902-R0 unless noted.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$350,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign operating pressure\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent capacity\u003c\/td\u003e\n\u003ctd\u003e200 lb, across two 100 lb ASME tanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlant material capacity\u003c\/td\u003e\n\u003ctd\u003e40 lb per run. 18,000 g dry, or about 72 lb of live resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum solvent temperature\u003c\/td\u003e\n\u003ctd\u003e-30 F (-34 C). Systems built with PTFE or rigid PTFE composite gaskets may run as low as -65 F (-54 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproved solvents\u003c\/td\u003e\n\u003ctd\u003en-Butane (CAS 106-97-8), Isobutane (CAS 75-28-5), Propane (CAS 74-98-6)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial columns\u003c\/td\u003e\n\u003ctd\u003eFour, 6 in x 48 in, jacketed and chilled, with sight spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery vessels\u003c\/td\u003e\n\u003ctd\u003eTwo, 12 in, jacketed, ASME U stamped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tanks\u003c\/td\u003e\n\u003ctd\u003eTwo, 100 lb, ASME U stamped\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor remediation columns\u003c\/td\u003e\n\u003ctd\u003eTwo, ASME U stamped, certified as part of the system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieves\u003c\/td\u003e\n\u003ctd\u003eTwo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery manifold\u003c\/td\u003e\n\u003ctd\u003eChilled, for faster recovery across both sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChilling method, as certified\u003c\/td\u003e\n\u003ctd\u003eMechanical chillers. Liquid CO2 and liquid nitrogen builds are also made, specified at order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVessel metal design temperature\u003c\/td\u003e\n\u003ctd\u003e-155 F to 200 F (-104 C to 93 C), per DCR-200101-R1 and DCR-210020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent tank jackets\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar), hydro tested at 130 psi (9.0 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColumn jackets and liquid CO2 inlets\u003c\/td\u003e\n\u003ctd\u003e22 psi (1.5 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003e24 to 48 kW hot water, supplied separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembled footprint\u003c\/td\u003e\n\u003ctd\u003e100 in x 44 in x 87 in, separable into two sides for moving in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrated weight\u003c\/td\u003e\n\u003ctd\u003e3,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrate\u003c\/td\u003e\n\u003ctd\u003eOne crate, 144 in long x 48 in wide x 90 in tall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery\u003c\/td\u003e\n\u003ctd\u003eFully passive, no solvent pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration\u003c\/td\u003e\n\u003ctd\u003eIn-line stainless sintered filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eElectrically classified C1D1 area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eNB-EXT-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe configuration above is our standard Double Barrel build and the one the report covers. Vessel sizes, jacket types and gasket materials can be specified differently, so your build sheet governs.\u003c\/p\u003e\n\n\u003ch3\u003eEVERY VESSEL IS RATED FOR FULL VACUUM\u003c\/h3\u003e\n\u003cp\u003eThat matters because you pull a vacuum on this machine every run, and a vessel rated only for internal pressure can collapse doing it. Inside diameters and pressure envelopes, from the report:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVessel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eInside diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVacuum rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMax design pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eASME U stamp\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolvent vessel\u003c\/td\u003e\n\u003ctd\u003e12.08 in\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi (-1.01 bar), full vacuum\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003eRequired and fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCollection and recovery vessel\u003c\/td\u003e\n\u003ctd\u003e12.38 in\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi (-1.01 bar), full vacuum\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003eRequired and fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor remediation column\u003c\/td\u003e\n\u003ctd\u003e7.78 in\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi (-1.01 bar), full vacuum\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003eRequired and fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial column\u003c\/td\u003e\n\u003ctd\u003e5.75 in\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi (-1.01 bar), full vacuum\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003eExempt, inside diameter 6 in or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMolecular sieve\u003c\/td\u003e\n\u003ctd\u003e5.72 in\u003c\/td\u003e\n\u003ctd\u003e-14.7 psi (-1.01 bar), full vacuum\u003c\/td\u003e\n\u003ctd\u003e250 psi (17.2 bar)\u003c\/td\u003e\n\u003ctd\u003eExempt, inside diameter 6 in or less\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eGasket choice sets the cold limit on this machine, not the vessels. The vessels are good to -155 F (-104 C). The certified minimum solvent temperature is -30 F (-34 C) on standard elastomeric gaskets, and PTFE or rigid PTFE composite gaskets take it to -65 F (-54 C). If you plan to run cold, choose the gasket for it. See \u003ca href=\"\/blogs\/tech\/choosing-the-right-gasket-material-for-tri-clamp-connections-a-comprehensive-comparison-of-buna-n-viton-and-ptfe\"\u003echoosing a gasket material\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCommon add-ons, priced separately: a \u003ca href=\"\/products\/secondary-material-vessel-rack\"\u003esecondary material column rack\u003c\/a\u003e, a \u003ca href=\"\/products\/tube-in-shell-condenser\"\u003etube in shell condenser\u003c\/a\u003e, extra \u003ca href=\"\/products\/hydrocarbon-solvent-tanks\"\u003e100 lb ASME solvent tanks\u003c\/a\u003e and extra \u003ca href=\"\/products\/asme-hydrocarbon-recovery-vessel\"\u003e12 in ASME recovery vessels\u003c\/a\u003e. If you are choosing between sizes, the \u003ca href=\"\/products\/20-lb-extraction-system\"\u003e20 LB system\u003c\/a\u003e is the same engineering on one side, and the \u003ca href=\"\/products\/40-lb-passive-hydrocarbon-extraction-system\"\u003esingle barrel compact 40 LB\u003c\/a\u003e gets the same throughput into a smaller footprint without the redundancy.\u003c\/p\u003e\n\n\u003ch3\u003eLEAD TIME, SHIPPING AND TERMS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e26 weeks from paid order to shipment.\u003c\/li\u003e\n\u003cli\u003eGaskets, PRVs, fittings and valves for this system are usually in stock and ship on their own.\u003c\/li\u003e\n\u003cli\u003ePaid in full before the system ships. We do not offer net 30 or purchase order terms.\u003c\/li\u003e\n\u003cli\u003eShips as one crate, 3,000 lb, 144 in long x 48 in wide x 90 in tall. Measure your dock and your doorway against that before delivery day.\u003c\/li\u003e\n\u003cli\u003eLTL freight, quoted and invoiced after the crate is measured, not charged at checkout.\u003c\/li\u003e\n\u003cli\u003eYour room has to be permitted for the solvent quantity you intend to store. Talk to us before you commit to a layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWHAT SHIPS WITH IT\u003c\/h3\u003e\n\u003cp\u003eOnsite training and commissioning are part of the delivery, not optional paperwork. Systems operated or modified by outside consultants without retraining are the ones that come back damaged.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eShips with the machine\u003c\/td\u003e\n\u003ctd\u003eHydrocarbon Operators Manual, What To Expect guide, onsite training and commissioning checklist, safety and process training with certification exam and certificate of completion, operators run log\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished free on this site\u003c\/td\u003e\n\u003ctd\u003eSintered Filter Tech Specs and the six Tech Tuesday technical briefs, including \u003ca href=\"\/blogs\/tech\/what-crc-media-should-you-use\"\u003eCRC media\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/molecular-sieves\"\u003emolecular sieves\u003c\/a\u003e, \u003ca href=\"\/blogs\/tech\/diamond-formation\"\u003ediamond formation\u003c\/a\u003e and \u003ca href=\"\/blogs\/tech\/storage-for-thc-cbd-cbn\"\u003ecannabinoid storage\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSERVICE SCHEDULE AND REORDER LIST\u003c\/h3\u003e\n\u003cp\u003eOnly the 6 in gasket count is a fixed figure on this system. Quantities for the other consumables vary with how your double barrel is built, so take them from the parts table in the Operators Manual that ships with the machine, or call the shop with your serial number.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePart\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e6 in gasket, \u003ca href=\"\/products\/tri-clamp-viton-gasket\"\u003eViton\u003c\/a\u003e or \u003ca href=\"\/products\/tri-clamp-buna-n-gasket\"\u003eBuna-N\u003c\/a\u003e, or \u003ca href=\"\/products\/envelope-gasket-ptfe-viton\"\u003ePTFE envelope\u003c\/a\u003e if you run below -30 F (-34 C)\u003c\/td\u003e\n\u003ctd\u003e44, plus spares. Double the 22 on a 20 LB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e2 in and 1.5 in gaskets\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/cryogenic-prv-1-4mnpt-320f\"\u003eCryogenic PRVs\u003c\/a\u003e, 250 psi (17.2 bar) on the vessels, 22 psi (1.5 bar) on the column jackets and liquid CO2 inlets, 100 psi (6.9 bar) on the solvent jackets\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus a spare of each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 to 6 months\u003c\/td\u003e\n\u003ctd\u003eHigh flow \u003ca href=\"\/products\/conrader-srv530-asme-high-flow-relief-valve\"\u003eConrader SRV530\u003c\/a\u003e, on the solvent tank tops and recovery vessel tops only\u003c\/td\u003e\n\u003ctd\u003e4, plus a spare\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 months\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/6-inch-diameter-high-pressure-clamp\"\u003e6 in high pressure tri clamps\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003ePer your build sheet, plus spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eBrass tri clamp nuts\u003c\/a\u003e, regardless of condition\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/bolts-for-6-inch-heavy-duty-clamps\"\u003eTri clamp bolts\u003c\/a\u003e, regardless of condition\u003c\/td\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/high-performance-ptfe-hose-with-compression-fitting-tube-adaptor\"\u003ePTFE hose adapter ends\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eOne per length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003eQuick connect body rebuilds\u003c\/td\u003e\n\u003ctd\u003eAs fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeekly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/molecular-sieve-beads-4a-pore-size\"\u003e4A molecular sieve beads\u003c\/a\u003e, 4x8 mesh\u003c\/td\u003e\n\u003ctd\u003eA 40 LB runs a larger sieve vessel than a 20 LB, so call the shop for the charge rather than scaling it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperator choice\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/6-inch-filter-sock\"\u003e6 in filter socks\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 24 in or one 48 in per column\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaned, not replaced\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sintered-tri-clamp-filter\"\u003eSintered tri clamp filters\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e50 and 20 micron on the material columns, two 5 micron plus one 1 micron on each CRC, 10 micron either side of each sieve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003eReplace gaskets on schedule regardless of appearance, and immediately on cracking, tearing, splitting or permanent deformation.\u003c\/li\u003e\n\u003cli\u003eTorque 30 in-lbs on elastomeric gaskets, 50 in-lbs on rigid.\u003c\/li\u003e\n\u003cli\u003eDo not substitute a purchased component for one outside the specification in ECR-250902-R0. That is what keeps the certification valid.\u003c\/li\u003e\n\u003cli\u003eKeep a second set of sintered filters so one runs while the other is in the ultrasonic.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":40715766530247,"sku":"NB-EXT-40","price":350000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/40LBShotgun5_Beauty.png?v=1657060909"},{"product_id":"thermocouple-tee","title":"Thermocouple Tee, Two 3\/8\" Compression Ports and 1\/4\" K Probe Port","description":"\u003cp\u003eA 316 stainless tee that puts a 1\/4 inch K-type thermocouple probe directly in the flow, with two 3\/8 inch compression tube ports on the run. $97.00, fabricated in Bend, Oregon.\u003c\/p\u003e\n\u003cp\u003eIt does the job of a tee, a reducer and a bore-through fitting in one part, so there is one joint to seal instead of three and nothing to weld.\u003c\/p\u003e\n\u003ch3\u003eWhat you get\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 3\/8 in. compression tube ports on the run\u003c\/li\u003e\n\u003cli\u003eOne 1\/4 in. port on the branch for a K-type thermocouple probe\u003c\/li\u003e\n\u003cli\u003e316 stainless body, and 316 stainless is what your process touches\u003c\/li\u003e\n\u003cli\u003eFabricated in our shop, not resold\u003c\/li\u003e\n\u003cli\u003eProbe not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTakes 3\/8 in. tube on both run ports. It is a compression connection, so it seats tube, not pipe thread\u003c\/li\u003e\n\u003cli\u003eTakes any of our 1\/4 in. K-type thermocouple probes. Short is usually right on an inline tee, 1 to 4 in.\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit 1\/4 in. or 1\/2 in. tube without a reducer outside the tee, and does not thread into an NPT port on its own\u003c\/li\u003e\n\u003cli\u003eDoes NOT include a probe, a gasket or a tri-clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReading it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe probe ends in a standard size male K plug and our four channel loggers take mini, so a K to mini-K extension cable goes between them\u003c\/li\u003e\n\u003cli\u003eYour logger has to sit well away from the machine in a classified room, so size the cable for the run and not for the tee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt here in Bend, Oregon, and orders usually go out the same day. We do not publish a pressure rating on this part yet, because the documentation is still being pulled together. Ask us and we will tell you what we know.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"Default Title","offer_id":40901163974855,"sku":"Thermo-Tee-Run","price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Thermo-T-JMEDIT_ca23b9b9-e54b-4f1a-bfff-26987823bb58.jpg?v=1631656521"},{"product_id":"superlok-3-4-tee","title":"Superlok 3\/4\" Union Tee SUT-12, 316 Stainless","description":"\u003cp\u003eSuperlok SUT-12 union tee, 3\/4 inch tube on all three ports, 316 stainless. It splits or combines a 3\/4 inch line in a T, which on our systems is usually the vapour side or a recovery header rather than a small instrument run. $77.39.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree ports, all 3\/4 inch tube OD, all the same size\u003c\/li\u003e\n\u003cli\u003e316 stainless body, two-ferrule compression seal on every port\u003c\/li\u003e\n\u003cli\u003eNuts and ferrules supplied on the fitting, one set per port\u003c\/li\u003e\n\u003cli\u003ePart number SUT-12-S316, where 12 is the 3\/4 inch tube size and S316 is the material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it goes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSplitting a 3\/4 inch vapour or recovery line to two destinations\u003c\/li\u003e\n\u003cli\u003eCombining two returns into one larger run\u003c\/li\u003e\n\u003cli\u003eHanging a 3\/4 inch branch off a main line without cutting in a manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRatings\u003c\/h3\u003e\n\u003cp\u003e3P Certz engineering report ECR-250902-R0 covers Superlok 316 stainless tube fittings up to 1 inch at 2400 psi (165 bar) and -320 °F to 1200 °F (-196 °C to 649 °C). That is the figure for the fitting family in the report. What your circuit actually holds is set by your tubing wall and by the weakest component on the line, not by the tee.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch OD tube on all three ports. This is not a reducing tee, so a 1\/2 inch or 3\/8 inch branch needs a reducer or a reducing tee.\u003c\/li\u003e\n\u003cli\u003eNot a tri-clamp part, not an NPT fitting, not a hose fitting.\u003c\/li\u003e\n\u003cli\u003eTube and any spare \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e are separate items.\u003c\/li\u003e\n\u003cli\u003eWe do not recommend mixing tube fitting components between manufacturers. Make the joint up with the nuts and ferrules that come with the fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$77.39, priced on this page. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"Default Title","offer_id":43051926880455,"sku":"SUT-12-S316","price":77.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/SuperlokTee.jpg?v=1676076769"},{"product_id":"superlok-half-inch-union-cross-suc-8","title":"Superlok 1\/2\" Union Cross SUC-8, 316 Stainless","description":"\u003cp\u003eSuperlok SUC-8 union cross, 1\/2 inch tube on all four ports, 316 stainless. It is the fitting you use when a line has to split three ways from one point, or when a run needs a gauge and a relief valve teed off the same junction. $71.44.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour ports, all 1\/2 inch tube OD, all the same size\u003c\/li\u003e\n\u003cli\u003e316 stainless body, two-ferrule compression seal on every port\u003c\/li\u003e\n\u003cli\u003eNuts and ferrules supplied on the fitting, one set per port\u003c\/li\u003e\n\u003cli\u003ePart number SUC-8-S316, where 8 is the 1\/2 inch tube size and S316 is the material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it goes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA solvent or recovery line that has to feed three destinations from one tap\u003c\/li\u003e\n\u003cli\u003eA junction carrying a gauge on one branch and a relief valve on another, off the same 1\/2 inch line\u003c\/li\u003e\n\u003cli\u003eInstrument manifolds where a sample point and a bleed sit on the same node\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRatings\u003c\/h3\u003e\n\u003cp\u003e3P Certz engineering report ECR-250902-R0 covers Superlok 316 stainless tube fittings up to 1 inch at 2400 psi (165 bar) and -320 °F to 1200 °F (-196 °C to 649 °C). That is the figure for the fitting family in the report. The working pressure of your circuit is set by your tubing wall and by the weakest component on the line, not by the cross.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1\/2 inch OD tube on all four ports. There is no reducing port on this one, so a 3\/8 inch branch needs a reducer or a reducing cross.\u003c\/li\u003e\n\u003cli\u003eNot a tri-clamp part, not an NPT fitting, not a hose fitting.\u003c\/li\u003e\n\u003cli\u003eTube and any spare \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e are separate items.\u003c\/li\u003e\n\u003cli\u003eMixing tube fitting components between manufacturers is not something we recommend. Make the joint up with the nuts and ferrules that come with the fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$71.44, priced on this page. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"Default Title","offer_id":43051929501895,"sku":"SUC-8-S316","price":71.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Superlok1.5unioncross.jpg?v=1676077070"},{"product_id":"swagelok-half-inch-union-ss-810-6-precision-tube-fitting-for-leak-tight-connections","title":"Swagelok 1\/2\" Union SS-810-6, 316 Stainless Tube Fitting","description":"\u003cp\u003eGenuine Swagelok SS-810-6 union, 1\/2 inch tube OD on both ends, 316 stainless. It joins two 1\/2 inch tubes. It is not a reducer, and the part number trips people up on that, so it is worth saying first. $38.00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications, as Swagelok publishes them\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSS-810-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003ctd\u003eStainless steel Swagelok tube fitting, union, 1\/2 in. tube OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 1\u003c\/td\u003e\n\u003ctd\u003e1\/2 in. Swagelok tube fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection 2\u003c\/td\u003e\n\u003ctd\u003e1\/2 in. Swagelok tube fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eSwagelok tube and adapter fittings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003eStandard cleaning and packaging, SC-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$38.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThe rating, and where it comes from\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3P Certz engineering report ECR-190031-R0 lists this exact part, Swagelok SS-810-6, 1\/2 inch tube union, 316 stainless housing, at a maximum pressure of 2600 psi (179 bar).\u003c\/li\u003e\n\u003cli\u003eThat figure tracks the tubing, not the fitting body. Your working pressure is set by your tube wall and by the weakest component on the circuit.\u003c\/li\u003e\n\u003cli\u003eMore on how components on our builds get certified in \u003ca href=\"\/blogs\/tech\/certifications-and-compliance\"\u003ecertifications and compliance\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2 inch OD tube on both ends. Not a reducer, not a bulkhead union, not a tube-to-NPT adapter.\u003c\/li\u003e\n\u003cli\u003eNot a tri-clamp part and not a hose fitting.\u003c\/li\u003e\n\u003cli\u003eNuts and ferrules are on the fitting, one set per end. Tube and spare \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e are separate items.\u003c\/li\u003e\n\u003cli\u003eSwagelok's own caution applies: do not mix or interchange Swagelok two-ferrule tube fitting components with another manufacturer's.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$38.00, priced on this page rather than behind a quote form. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Swagelok","offers":[{"title":"Default Title","offer_id":43051930845383,"sku":"SS-810-6","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_3004.heic?v=1734555244"},{"product_id":"superlok-check-valve-100-psi","title":"Superlok 3\/8\" Check Valve SHCV2-S-6-100P, 100 psi Cracking","description":"\u003cp\u003eSuperlok SHCV2-S-6-100P poppet check valve, 3\/8 inch Superlok tube fitting both ends, 316 stainless, fixed 100 psi (6.9 bar) cracking pressure. One-way flow on instrument and process lines. $65.00.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFinal stock, not being restocked.\u003c\/strong\u003e We have stopped using this valve on our own builds, so what is on the shelf is the last of it. There is no reorder behind it. When it is gone this listing goes with it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf you just need a check valve, buy the \u003ca href=\"\/products\/swagelok-check-valve-ss-chs6-25-poppit\"\u003eSwagelok SS-CHS6-25\u003c\/a\u003e instead.\u003c\/strong\u003e Same 3\/8 inch size, 25 psig (1.8 bar) cracking, and it is the one we stock and keep stocking. This page is here for the person who specifically needs a 100 psi (6.9 bar) cracking pressure, or who is matching a valve already in their system.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications, per the Superlok SHCV2 series catalogue\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSHCV2-S-6-100P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube size\u003c\/td\u003e\n\u003ctd\u003e3\/8 in tube OD, Superlok tube fitting both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCracking pressure\u003c\/td\u003e\n\u003ctd\u003e100 psi (6.9 bar), fixed. The 100P in the part number is the cracking pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working pressure\u003c\/td\u003e\n\u003ctd\u003e6,000 psig (413 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCv\u003c\/td\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003e316 stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal, standard\u003c\/td\u003e\n\u003ctd\u003eFluorocarbon FKM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range, FKM seal\u003c\/td\u003e\n\u003ctd\u003e-10 °F to 375 °F (-23 °C to 190 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanism\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded poppet, straight-through flow path\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailability\u003c\/td\u003e\n\u003ctd\u003eClearance, final stock, not being restocked\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$65.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eSeal options and what they cost you in temperature\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003cth\u003eTemperature range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFKM, standard\u003c\/td\u003e\n\u003ctd\u003e-10 °F to 375 °F (-23 °C to 190 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003ctd\u003e-50 °F to 300 °F (-46 °C to 149 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNBR\u003c\/td\u003e\n\u003ctd\u003e-10 °F to 250 °F (-23 °C to 121 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe valve on this page is the FKM build. Since this is final stock, what is on the shelf is what there is, so ask before you order if you need the cold end.\u003c\/p\u003e\n\n\u003ch3\u003ePicking a cracking pressure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100 psi (6.9 bar) is a high cracking pressure. It is right when the valve has to stay firmly shut until the system is genuinely up to pressure.\u003c\/li\u003e\n\u003cli\u003eIt is the wrong choice anywhere you want flow to start early, or on a low-pressure vapour path.\u003c\/li\u003e\n\u003cli\u003eFor a low set point, and for anything you will want to buy again, the \u003ca href=\"\/products\/swagelok-check-valve-ss-chs6-25-poppit\"\u003eSwagelok SS-CHS6-25\u003c\/a\u003e is the stocked option, same 3\/8 inch size, 25 psig (1.8 bar) cracking.\u003c\/li\u003e\n\u003cli\u003eNot sure which your line needs? Call 541-330-6409 and we will work it out with you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 3\/8 inch OD tube, Superlok tube fitting both ends. Flow is one way, so it has to go in the right way round.\u003c\/li\u003e\n\u003cli\u003eDoes not fit tri-clamp, NPT or hose ends, and it is not a relief valve.\u003c\/li\u003e\n\u003cli\u003eTube and spare \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e are separate items.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$65.00, priced on this page. Final stock. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"Default Title","offer_id":43051953127623,"sku":"SHCV2-S-6-100P","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_2999.heic?v=1734550123"},{"product_id":"swagelok-check-valve-ss-chs6-25-poppit","title":"Swagelok 3\/8\" Check Valve SS-CHS6-25, Poppet, 25 psi Cracking","description":"\u003cp\u003eGenuine Swagelok SS-CHS6-25 poppet check valve, 3\/8 inch Swagelok tube fitting both ends, 316 stainless, 25 psig (1.8 bar) cracking pressure. This is the 25 psi valve, not the 1 psi one, and the two are not interchangeable. $145.00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications, as Swagelok publishes them\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSS-CHS6-25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwagelok description\u003c\/td\u003e\n\u003ctd\u003eStainless steel poppet 6000 psig (413 bar) check valve, 3\/8 in. Swagelok tube fitting, 25 psig (1.8 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCracking pressure\u003c\/td\u003e\n\u003ctd\u003e25 psig (1.8 bar), fixed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoom temperature pressure rating\u003c\/td\u003e\n\u003ctd\u003e6,000 psig at 100 °F (413 bar at 37 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure rating at temperature\u003c\/td\u003e\n\u003ctd\u003e4,280 psig at 400 °F (294 bar at 204 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e3\/8 in. Swagelok tube fitting, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003e316 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal and O-rings\u003c\/td\u003e\n\u003ctd\u003eFluorocarbon FKM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackup ring\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubricant\u003c\/td\u003e\n\u003ctd\u003eChristo-lube MCG 111 (WL8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003eStandard cleaning and packaging, SC-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$145.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTemperature, and the honest version of it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3P Certz engineering reports ECR-190105-R0 and ECR-190082-R3 list the CHS6 poppet check valve at -50 °F to 300 °F (-46 °C to 149 °C) on an N.B. Oler build. That is the figure we publish.\u003c\/li\u003e\n\u003cli\u003eThe part number 3P Certz qualified in those reports is SS-CHS6-100, the 100 psig (6.9 bar) cracking version of this same CHS6 series valve. Same body, same seals, different spring. We say so rather than implying the 25 psi version was the one reviewed.\u003c\/li\u003e\n\u003cli\u003eSwagelok publishes a pressure rating point at 400 °F (204 °C), so the valve itself goes higher. We quote the lower number because it is the one that was reviewed for service on our equipment.\u003c\/li\u003e\n\u003cli\u003e100 °F (37 °C) is the reference temperature for the 6,000 psig (413 bar) rating. It is not a maximum operating temperature, and a page that says so is wrong.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCracking pressure, and why 25 psi\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25 psig (1.8 bar) is a mid-range set point. It holds shut against a modest back pressure and still opens well below system pressure.\u003c\/li\u003e\n\u003cli\u003eSwagelok build this series with other cracking pressures, including 1 psig (0.07 bar) and 100 psig (6.9 bar). A 1 psi valve in a 25 psi position will chatter and pass; a 100 psi valve in a 25 psi position will not open when you want it to. Read the number on the part, not the picture.\u003c\/li\u003e\n\u003cli\u003eIf you want 100 psi (6.9 bar) cracking in the same 3\/8 inch size, we stock the \u003ca href=\"\/products\/superlok-check-valve-100-psi\"\u003eSuperlok SHCV2-S-6-100P\u003c\/a\u003e at $65.00.\u003c\/li\u003e\n\u003cli\u003eNot sure which set point your line needs? Call 541-330-6409.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 3\/8 inch OD tube, Swagelok tube fitting both ends. Directional, so it has to be installed with the flow.\u003c\/li\u003e\n\u003cli\u003eDoes not fit tri-clamp, NPT or hose ends, and it is not a relief valve.\u003c\/li\u003e\n\u003cli\u003eTube and spare \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e are separate items.\u003c\/li\u003e\n\u003cli\u003eDo not mix Swagelok two-ferrule components with another manufacturer's. That is Swagelok's own caution and we follow it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$145.00, priced on this page. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Swagelok","offers":[{"title":"Default Title","offer_id":43051954995399,"sku":"SS-CHS6-25","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_2997.heic?v=1734550404"},{"product_id":"superlok-sbv120h2-s4-lt-ball-valve","title":"Superlok SBV120H2-S4-LT Ball Valve, 1\/4\" 316 SS, 3000 psi, -65 °F","description":"\u003cp\u003eSuperlok SBV120H2-S4-LT one-piece ball valve, 1\/4 inch tube, 316 stainless, 3000 psig (206 bar) at 100 F (38 C). Rated to -65 F (-54 C). $65.00.\u003c\/p\u003e\n\u003cp\u003eThe cold rating is not on the manufacturer's website, and that is the reason this page exists.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe LT in the part number is the low temperature build.\u003c\/li\u003e\n\u003cli\u003eSuperlok's public catalogue lists the standard SBV120H2-S-4 at 50 F to 150 F (10 C to 65 C) and does not list the LT at all.\u003c\/li\u003e\n\u003cli\u003eWe hold the factory certificate. BMT Co. Ltd, dated 27 January 2021, certifies the Superlok 120 LT series to -65 F (-54 C). Ask and we will send you a copy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSo this one does go on a cold line. Downstream of a chiller, on a recovery circuit, anywhere running below ambient. Upper limit is 150 F (65 C).\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSBV120H2-S4-LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e1\/4 in tube, both ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum working pressure\u003c\/td\u003e\n\u003ctd\u003e3000 psig (206 bar) at 100 F (38 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-65 F to 150 F (-54 C to 65 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice\u003c\/td\u003e\n\u003ctd\u003e4.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCv\u003c\/td\u003e\n\u003ctd\u003e2.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBore\u003c\/td\u003e\n\u003ctd\u003eStandard bore, not full port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003eOne-piece 316 stainless, one-piece ball stem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eBlack, quarter turn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$65.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eThis one or the SBV210?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eSBV120H2-S4-LT\u003c\/th\u003e\n\u003cth\u003eSBV210-S\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003e1\/4 in\u003c\/td\u003e\n\u003ctd\u003e3\/8, 1\/2, 3\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure\u003c\/td\u003e\n\u003ctd\u003e3000 psig (206 bar)\u003c\/td\u003e\n\u003ctd\u003e1000 psig (69 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum temperature\u003c\/td\u003e\n\u003ctd\u003e-65 F (-54 C)\u003c\/td\u003e\n\u003ctd\u003e-65 F (-54 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum temperature\u003c\/td\u003e\n\u003ctd\u003e150 F (65 C)\u003c\/td\u003e\n\u003ctd\u003e450 F (232 C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice\u003c\/td\u003e\n\u003ctd\u003e4.8 mm\u003c\/td\u003e\n\u003ctd\u003e7.5 to 12.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis one if you need 1\/4 inch, or if you need 3000 psig (206 bar). The \u003ca href=\"\/products\/superlok-ball-valve\"\u003eSBV210-S\u003c\/a\u003e if you need 3\/8 inch or larger.\u003c\/p\u003e\n\u003ch3\u003eWe also stock the genuine Swagelok, same price\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/swagelok-ball-valve\"\u003eSwagelok SS-43GS4\u003c\/a\u003e is the other 1\/4 inch ball valve on our shelf and it is also \u003cstrong\u003e$65.00\u003c\/strong\u003e, on clearance, ten left and not restocked. It matches this valve on size, on one-piece 316 stainless construction and on 3000 psig (206 bar), and both are rated to -65 F, which Superlok publishes as -54 C and Swagelok as -53 C. The difference is the top end: the Swagelok goes to 300 F (148 C) where this one stops at 150 F (65 C), though its pressure derates to 2500 psig (172 bar) up there. Published Cv is 1.4 against 2.4 here, on a 4.7 mm orifice against 4.8 mm. At the same money, take the Swagelok if the line ever runs hot or you want the genuine article. Take this one for the larger Cv and because we will still have it next year.\u003c\/p\u003e\n\u003ch3\u003eFitment and the part number\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1\/4 inch tube compression lines. Superlok publishes Swagelok SS-43GS4 as the equivalent part, and it is visually a clone, so it drops into the same place.\u003c\/li\u003e\n\u003cli\u003eDoes not fit tri-clamp, NPT or hose ends. Tube only.\u003c\/li\u003e\n\u003cli\u003eSuperlok's published ordering table does not list an LT suffix for this series. We carry it as SBV120H2-S4-LT, as supplied to us.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStocked in Bend, Oregon.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"Default Title","offer_id":43056037462215,"sku":"SBV120H2-S4-LT","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_8332.heic?v=1715277927"},{"product_id":"superlok-half-inch-bulkhead-union","title":"Superlok 1\/2\" Bulkhead Union SBHU-8-S316, 316 Stainless","description":"\u003cp\u003eSuperlok SBHU-8-S316 bulkhead union, 1\/2 inch tube on both sides, 316 stainless. It carries a tube line through a panel, an enclosure wall or a skid frame and keeps the joint accessible from both faces. $35.00.\u003c\/p\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e316 stainless body, nut and ferrule tube ends on both sides\u003c\/li\u003e\n\u003cli\u003e1\/2 inch tube OD in, 1\/2 inch tube OD out. Not a reducer.\u003c\/li\u003e\n\u003cli\u003eThreaded barrel with a jam nut, so the fitting mounts in a drilled panel and the line lands square on both faces\u003c\/li\u003e\n\u003cli\u003eTwo-ferrule compression seal, the same make-up as the rest of the Superlok tube fitting family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it goes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBringing solvent, nitrogen or CO2 lines through the wall of an enclosure or a C1D1 room partition\u003c\/li\u003e\n\u003cli\u003ePanel-mounted gauge, transducer and instrument runs, where the line has to be broken at the panel\u003c\/li\u003e\n\u003cli\u003eSkid frame pass-throughs, so a line can be disconnected outside without pulling the tube through the hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRatings\u003c\/h3\u003e\n\u003cp\u003e3P Certz engineering report ECR-250902-R0 covers Superlok 316 stainless tube fittings up to 1 inch at 2400 psi (165 bar) and -320 °F to 1200 °F (-196 °C to 649 °C). That is the fitting family figure in the report. What your line actually holds is set by your tubing wall and by the weakest component on the circuit, not by the fitting.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1\/2 inch OD tube, both sides. It does not fit 3\/8 inch or 3\/4 inch, and it is not a tube-to-NPT adapter.\u003c\/li\u003e\n\u003cli\u003eNot a tri-clamp part and not a hose fitting.\u003c\/li\u003e\n\u003cli\u003ePanel hole and maximum panel thickness depend on the Superlok dimension sheet. Call 541-330-6409 with your panel thickness before you order if the wall is thick, and we will check it against the sheet.\u003c\/li\u003e\n\u003cli\u003eTube, nuts and ferrules for the mating tube are not included. We sell \u003ca href=\"\/products\/stainless-steel-nut-ferrule-sets-compression-fittings\"\u003enut and ferrule sets\u003c\/a\u003e separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e$35.00, priced on this page rather than behind a quote form. Ships from Bend, Oregon.\u003c\/p\u003e","brand":"Superlok","offers":[{"title":"Default Title","offer_id":43115665096903,"sku":"SBHU-8-S316","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_8326.heic?v=1692207567"},{"product_id":"c1d1-flashlight-mount","title":"C1D1 Flashlight Mount, 2\" High Pressure Clamp, Lights the Vessel","description":"\u003cp\u003eA mount that holds an intrinsically safe flashlight on a 2 inch high pressure clamp on top of your vessel, so the beam goes down through the sight glass and lights the inside. $62.95 with the clamp, or $119.95 with the clamp and the light, which saves $8.00.\u003c\/p\u003e\n\n\u003ch2\u003eWhat it does\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamps on top of the vessel, above a 2 inch Rayotek or Metaglas sight glass\u003c\/li\u003e\n\u003cli\u003eAims the light down through the glass, so you can see what is happening in there without holding a torch and without opening anything\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered here, through four revisions fit checked against a real sight glass rather than a drawing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial and fit\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNylon PA12, Multi Jet Fusion print, dyed black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e48 MPa (6,960 psi, 480 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElongation at break\u003c\/td\u003e\n\u003ctd\u003e20 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection at 0.45 MPa (66 psi, 4.5 bar)\u003c\/td\u003e\n\u003ctd\u003e175 °C (347 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat deflection at 1.82 MPa (264 psi, 18.2 bar)\u003c\/td\u003e\n\u003ctd\u003e95 °C (203 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChemical resistance\u003c\/td\u003e\n\u003ctd\u003eRated excellent against oils, greases and aliphatic hydrocarbons, the family butane and propane belong to\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFits\u003c\/td\u003e\n\u003ctd\u003e2 in high pressure double bolted tri clamp, ours. The clamp is included on both versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoes not fit\u003c\/td\u003e\n\u003ctd\u003e1.5 in or 4 in clamps, single hinge or wing nut clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eIt is a tough, chemical resistant nylon rather than a hobby plastic. It is cut to our own 2 inch clamp, which is why the clamp comes with it, and a 2 inch clamp from another supplier may not seat correctly.\u003c\/p\u003e\n\n\u003ch2\u003eTwo ways to buy\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount and Clamp\u003c\/td\u003e\n\u003ctd\u003e$62.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount, Clamp and Flashlight\u003c\/td\u003e\n\u003ctd\u003e$119.95, which saves $8.00 against $127.95 bought separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe light is the intrinsically safe C1D1 flashlight we sell, and the mount is cut for it.\u003c\/p\u003e\n\n\u003ch2\u003eThe bracket is not a certified electrical device\u003c\/h2\u003e\n\u003cp\u003eIt does not need to be. It is a passive holder with no electrical parts. The flashlight's own intrinsic safety listing to UL 913 is what makes the light permissible in a Class I Division 1 room, and a bracket neither adds to that nor takes away from it. The C1D1 in the name refers to the light it holds.\u003c\/p\u003e","brand":"N.B.Oler","offers":[{"title":"Mount \u0026 Clamp","offer_id":43229264576711,"sku":"NBO-2-NIGHTSTICK-1","price":62.95,"currency_code":"USD","in_stock":true},{"title":"Mount \u0026 Clamp \u0026 Flashlight","offer_id":43229264609479,"sku":"NBO-2-NIGHTSTICK-2","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/files\/IMG_7838.heic?v=1685476463"},{"product_id":"2-metaclamp-metaglas-tri-clamp-sight-glass","title":"MetaClamp 2\" Tri-Clamp Sight Glass, Borosilicate \u0026 2205 Duplex","description":"\u003cp\u003eA 2 inch tri clamp sight window, borosilicate glass in a 2205 duplex stainless ring. MetaClamp, by Metaglas. $449.95 each, in stock, and most builds take two.\u003c\/p\u003e\n\n\u003ch2\u003eRatings\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e2 in sanitary tri clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003ctd\u003eBorosilicate to DIN 7080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing\u003c\/td\u003e\n\u003ctd\u003eDuplex stainless 1.4462, the European designation for 2205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e232 psi (16 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pressure\u003c\/td\u003e\n\u003ctd\u003e-14.5 psi (-1.0 bar), which is full vacuum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e-22 °F to 536 °F (-30 °C to 280 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSource\u003c\/td\u003e\n\u003ctd\u003eMetaglas published ratings, MetaClamp Type 80, the 2 in ASME BPE size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$449.95 each, two per sight spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMetaglas publishes the pressure and the temperature as separate limits rather than a pressure at a temperature, so the 232 psi (16 bar) is not conditional on running hot. The temperature range belongs to the 1.4462 duplex ring, and Metaglas lists a different range for each ring material, so the ring is the part that sets it.\u003c\/p\u003e\n\u003cp\u003eThe ring also runs warmer than the solvent, because its outer face sees room air while its inner face sees process. 3P Certz ran that thermal analysis on a Metaglas window in report ECR-210006-R1 and concluded the ring stays above its minimum with solvent entering at -65 °F (-54 °C). So the cold figure on this table is the ring's own rating, not a solvent temperature.\u003c\/p\u003e\n\n\u003ch2\u003eMetaClamp or Rayotek\u003c\/h2\u003e\n\u003cp\u003eWe stock both and fit both. This one is in stock now.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eMetaClamp, this page\u003c\/td\u003e\n\u003ctd\u003eRayotek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum pressure\u003c\/td\u003e\n\u003ctd\u003e232 psi (16 bar)\u003c\/td\u003e\n\u003ctd\u003e300 psi (20.7 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e-22 °F to 536 °F (-30 °C to 280 °C)\u003c\/td\u003e\n\u003ctd\u003e-40 °F to 572 °F (-40 °C to 300 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum pressure\u003c\/td\u003e\n\u003ctd\u003e-14.5 psi (-1.0 bar)\u003c\/td\u003e\n\u003ctd\u003e-15 psi (-1.0 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNamed by part number in ECR-250902-R0\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$449.95\u003c\/td\u003e\n\u003ctd\u003e$449.95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eOur hydrocarbon systems are designed to 250 psi (17.2 bar). At 232 psi (16 bar) this window is the governing limit on such a system and the relief valve should be set to suit. If you want a published rating that clears 250 psi (17.2 bar) outright, use the Rayotek.\u003c\/p\u003e\n\u003cp\u003eIf you are certifying, recertifying or matching an as built document, confirm your window choice with your own certifier. That is worth doing whichever one you pick.\u003c\/p\u003e\n\u003cp\u003eOn vacuum, the 2 inch sight glass is the component that limits minimum pressure for the whole assembly. Metaglas publishes -1.0 bar (-14.5 psi) for this window, which is full vacuum, and our report puts the Rayotek at -15 psi (-1.0 bar). Either way the 2 inch window is the figure to design a vacuum step around.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you also need\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo windows per sight spool, one in each 2 inch port\u003c\/li\u003e\n\u003cli\u003eOne 2 inch gasket per window, Viton or PTFE envelope\u003c\/li\u003e\n\u003cli\u003eOne 2 inch high pressure clamp per window\u003c\/li\u003e\n\u003cli\u003eThe spool itself, 4 inch or 6 inch, if you do not already have one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits our 4 inch and 6 inch sight glass spools, and any standard 2 inch tri clamp port. Nothing in the list above is included.\u003c\/p\u003e\n\n\u003ch2\u003eHandling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect before every install. A chipped, cracked or scratched window comes out of service and does not go back in\u003c\/li\u003e\n\u003cli\u003eNever modify, machine or re-face a sight window\u003c\/li\u003e\n\u003cli\u003eClean with a soft cloth and a solvent compatible with borosilicate and 2205. No abrasives, nothing metal on the glass face\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn stock in Bend, Oregon.\u003c\/p\u003e","brand":"N.B. Oler","offers":[{"title":"Default Title","offer_id":45630191796423,"sku":"LJS-METACLAMP-200","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2134\/5331\/products\/Sightglass_c58e97fb-124c-40ae-a50e-31655570f493.png?v=1528490677"}],"url":"https:\/\/www.nboler.com\/collections\/hydrocarbon-products.oembed?page=2","provider":"N.B.Oler","version":"1.0","type":"link"}