HOME / WHO WE WORK WITH
Who We Work With
The certifying body, the equipment we recommend, and the component brands we stock and build with. Five companies whose work shows up inside or alongside every system that leaves our shop.
3PCERTZ
THIRD-PARTY CERTIFICATIONThird-party equipment certification. They produce the Equipment Certification Reports that get N.B. Oler systems approved by authorities having jurisdiction in states requiring peer review. Every buildout we ship is certified through them.
MYDAX
MYDAX
RECOMMENDED CHILLERSRecommended chillers, the CryoDax line. Chiller capacity sets your column temperature, so the unit is matched to the system at quote time rather than sourced afterward.
CRYODAX UNITPAIRS WITH
CryoDax 12X10 LB system
CryoDax 20X20 LB system
CryoDax 30X40 LB Double Barrel
PODTRONIX
EXTRACTION BOOTHSExtraction booths. Our exclusive booth partner. The booth is the C1D1 envelope the system sits inside, so its layout and our equipment footprint are coordinated together.
SUPERLOK
SUPERLOK
LOW-TEMPERATURE FITTINGSThe low-temperature instrumentation fitting line. Superlok is what we reach for on the cold side, where a ferrule has to hold a seal through repeated cycles down to minus 60 C, and it costs meaningfully less than the reference brand at the same rating. Dimensionally interchangeable with Swagelok, so a fitting can be replaced with either.
SHOP THE SUPERLOK COLLECTION →SWAGELOK
SWAGELOK
REFERENCE STANDARDThe reference standard. When a specification, a peer reviewer or an insurer names a fitting brand, this is the one it names, and we stock it for exactly that reason. We will not tell you it outperforms Superlok in our service, because on our systems it does not, but if your paperwork calls for it, it is on the shelf.
SHOP THE SWAGELOK COLLECTION →SPECIFYING A SYSTEM WITH ANY OF THESE?
Chiller sizing, booth layout and certification scope are settled before the build starts, not after.