PRICED ONLINE. BUILT IN BEND, OREGON. ASME CERTIFIED.

HOME / ALL COLLECTIONS

All Collections

Every product category on the site, with the price on every product page.

The 20 LB closed loop hydrocarbon extractor, built around an ASME Section VIII Division 1 code vessel and delivered as a comple...

The 40 LB passive closed loop extractors, single barrel and double barrel, built around ASME Section VIII Division 1 code vesse...

Clamps & Hardware

Tri clamps and clamp hardware rated for pressure service, so the joint is not the weak point in the line. Several ratings are s...

The gaskets, filter media, relief valves and wear parts that come off the shelf on a maintenance schedule. Everything here fits...

Stand-alone color remediation columns in 4 inch and 6 inch, on their own rolling rack with a jacketed bottom spool, so remediat...

Relief valves for closed loop systems, in the three kinds a hydrocarbon shop actually needs. They are not interchangeable, so r...

Discounted Parts

New old stock, overstock, discontinued lines and open-box parts, priced to clear. Stock is whatever is on the shelf, so a listi...

Parts and equipment for cold ethanol extraction and post processing: falling film evaporators, lenticular and depth filtration,...

Stainless filtration for hydrocarbon and ethanol processing: sintered discs, perforated plates with drop-in rings, filter socks...

Compression fittings, hose adapters, unions, tees, bulkheads, quick connects, ball valves, check valves and nut and ferrule set...

An intrinsically safe flashlight and the clamp mount that holds it, for looking inside a vessel in a Class I Division 1 room wi...

Tri clamp gaskets in five materials, 1 inch through 10 inch. On a cold system the gasket, not the vessel, sets the low temperat...

One compound gauge, built to our specification with our dial, our range and our temperature rating, plus the 6 inch end cap tha...

Static dissipative PTFE hose assemblies and the push-on adapters that terminate them, for solvent transfer on a closed loop sys...

Everything we build and stock for closed loop hydrocarbon extraction: ASME solvent tanks and recovery vessels, complete passive...

The material side of a closed loop system: the rack that holds several material vessels at once, and the socks that pack them. ...

Quick connects in two different jobs, and they are not interchangeable. Read which one you are buying. The zero spill coupling...

Recovery equipment for two different processes: the ASME coded recovery vessel on a hydrocarbon system, and the falling film ev...

Molecular sieve beads for drying a process stream. The grade matters more than the price, because the wrong pore size will adso...

Sight spools and the 2 inch windows that go in them, so an operator can watch a column instead of guessing at it. The 4 inch a...

Equipment we built because something in a production room was not working, and nothing off the shelf fixed it. Most of these st...

An inline solvent filter and its replaceable cartridges, for catching what comes in with the solvent before it reaches the vess...

Superlok instrument fittings and valves in 316 stainless, stocked in Bend, Oregon. These are the same parts on our own shop she...

Genuine Swagelok valves and fittings in 316 stainless, in stock in Bend, Oregon with the price on the page. Stocked, not drop s...

Complete closed loop hydrocarbon extraction systems in 10 LB, 20 LB and 40 LB, built around ASME Section VIII Division 1 code v...

Thermocouple Parts

K-type temperature measurement for a hazardous room: probes, extension cables built to order, a four channel logger, and the sp...

Tube in Shell Condenser

Shell and tube condensers for hydrocarbon recovery, as a stand-alone unit or as a drop-in kit for a solvent tank you already ow...

Stainless pressure and process vessels, fabricated in our own shop in Bend, Oregon, in 304 and 304L or 316 and 316L, welded GTA...