C1D1 Flashlight Mount, 2" High Pressure Clamp, Lights the Vessel
ABOUT THIS PART
A mount that holds an intrinsically safe flashlight on a 2 inch high pressure clamp on top of your vessel, so the beam goes down through the sight glass and lights the inside. $62.95 with the clamp, or $119.95 with the clamp and the light, which saves $8.00.
SPECIFICATIONS
| What it does | Holds an intrinsically safe flashlight on a tri clamp on top of a vessel, lighting the inside through the sight glass |
|---|---|
| Fits clamp | 2 in high pressure double bolted tri clamp, N.B. Oler clamp |
| Clamp included | Yes, on both variants |
| Flashlight included | Only on the Mount, Clamp & Flashlight variant |
| Cut for | Our intrinsically safe C1D1 flashlight |
| Material | Nylon PA12, Multi Jet Fusion print, dyed black |
| Tensile strength | 48 MPa (6,960 psi, 480 bar) |
| Elongation at break | 20 percent |
| Heat deflection, 0.45 MPa (66 psi, 4.5 bar) | 175 C (347 F) |
| Heat deflection, 1.82 MPa (264 psi, 18.2 bar) | 95 C (203 F) |
| Chemical resistance | Rated excellent against oils, greases and aliphatic hydrocarbons |
| Certification of the bracket | None, and none required. It is a passive holder |
| Designed | In house, Bend, Oregon |
| Price, Mount and Clamp | $62.95 |
| Price, Mount, Clamp and Flashlight | $119.95 |
| Bundle saving | $8.00 against buying the mount, clamp and light separately |
What it does
- Clamps on top of the vessel, above a 2 inch Rayotek or Metaglas sight glass
- Aims the light down through the glass, so you can see what is happening in there without holding a torch and without opening anything
- Designed and engineered here, through four revisions fit checked against a real sight glass rather than a drawing
Material and fit
| Material | Nylon PA12, Multi Jet Fusion print, dyed black |
| Tensile strength | 48 MPa (6,960 psi, 480 bar) |
| Elongation at break | 20 percent |
| Heat deflection at 0.45 MPa (66 psi, 4.5 bar) | 175 °C (347 °F) |
| Heat deflection at 1.82 MPa (264 psi, 18.2 bar) | 95 °C (203 °F) |
| Chemical resistance | Rated excellent against oils, greases and aliphatic hydrocarbons, the family butane and propane belong to |
| Fits | 2 in high pressure double bolted tri clamp, ours. The clamp is included on both versions |
| Does not fit | 1.5 in or 4 in clamps, single hinge or wing nut clamps |
It is a tough, chemical resistant nylon rather than a hobby plastic. It is cut to our own 2 inch clamp, which is why the clamp comes with it, and a 2 inch clamp from another supplier may not seat correctly.
Two ways to buy
| Mount and Clamp | $62.95 |
| Mount, Clamp and Flashlight | $119.95, which saves $8.00 against $127.95 bought separately |
The light is the intrinsically safe C1D1 flashlight we sell, and the mount is cut for it.
The bracket is not a certified electrical device
It does not need to be. It is a passive holder with no electrical parts. The flashlight's own intrinsic safety listing to UL 913 is what makes the light permissible in a Class I Division 1 room, and a bracket neither adds to that nor takes away from it. The C1D1 in the name refers to the light it holds.
| FITS | A 2 inch high pressure double bolted tri clamp of our own manufacture, mounted on top of a vessel above a Rayotek or Metaglas sight glass, so the flashlight shines down inside. Cut for the intrinsically safe C1D1 flashlight we sell. Does NOT fit a 1.5 inch or 4 inch clamp, does NOT fit a single hinge or wing nut clamp, and may not seat correctly on a 2 inch high pressure clamp from another supplier. The mount is a bracket, NOT a rated electrical enclosure, and it does not change the flashlight's certification either way. |
|---|
▦ IN YOUR MANUAL
This part appears in the operator manual that ships with your system. The QR code there links to this page.
◈ REFERENCE FOR THIS PART
COMMON QUESTIONS
What is it for?
It holds a flashlight on a 2 inch high pressure clamp on top of your vessel, above the sight glass, so the beam goes down through the glass and lights the inside of the vessel. You can see what is happening in there without holding a torch and without opening anything.
Does the clamp come with it?
Yes. Both versions include the 2 inch high pressure clamp.
Will it fit my clamp?
It is cut to our own 2 inch high pressure double bolted clamp. A 2 inch clamp from another supplier may not seat correctly, which is why we include ours.
Which sight glass does it work over?
It is used on top of a vessel above a 2 inch Rayotek or Metaglas sight glass, which is what we fit.
What is it made of?
Nylon PA12, printed by Multi Jet Fusion and dyed black. The material is rated for excellent chemical resistance to oils, greases and aliphatic hydrocarbons, which is the family butane and propane belong to, and its heat deflection temperature is 175 C (347 F) at low load.
Is the mount itself C1D1 certified?
No, and it does not need to be. It is a passive bracket with no electrical parts. The flashlight carries the intrinsic safety listing to UL 913, and that is what makes the light permissible.
Which flashlight does it fit?
It is cut for the intrinsically safe C1D1 flashlight we sell. Buy them together and save $8.00.
Will it fit a 1.5 inch or 4 inch clamp?
No. It is cut for the 2 inch only.
What does it cost?
$62.95 for the mount and clamp, or $119.95 for the mount, clamp and flashlight together.



